We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.8m cable with 6.35mm mono plug and 3.5mm right-angle mono plug

Ruth's sister

Ruth's sister 6.35mm to 3.5mm TS Mono Adapter Cable 1.8m

SKU CH-RGEX-5SMGT

Connects 6.35 mm mono devices to 3.5 mm mono inputs with a 1.8 m gold-plated cable and 90-degree right-angle plug

  • Connect instruments with 6.35mm jack to 3.5mm inputs
  • 8m cable length gives flexible placement options
  • Gold-plated connectors ensure stable signal transfer
  • Right-angle 3.5mm plug reduces strain on device ports
  • Male-to-male TS mono design suits audio equipment

TS Mono Adapter for Audio Integration

This 1.8 metre cable converts a 6.35 mm mono TS plug to a 3.5 mm mono TS plug, letting musicians and engineers patch instruments, mixers or amplifiers into portable recorders, laptops or compact interfaces. The right-angle 6.35 mm end reduces strain on panel-mounted jacks in tight rack spaces.

Male-to-Male Wiring with Gold Contacts

Both ends are male, so the adapter sits directly between a source and an input without extra couplers. Gold-plated contacts preserve signal integrity across the 1.8 m run, while the PVC jacket resists kinking when routed around pedalboards or desk edges.

Stable Transfer Over Extended Sessions

The mono TS wiring carries a single unbalanced channel, so hum rejection depends on the connected gear rather than the cable itself. Under continuous use the metal shells and strain reliefs maintain a secure fit, preventing intermittent drop-outs during long rehearsals or broadcasts.

Highlights

  • Connect instruments with 6.35mm jack to 3.5mm inputs
  • 8m cable length gives flexible placement options
  • Gold-plated connectors ensure stable signal transfer
  • Right-angle 3.5mm plug reduces strain on device ports
  • Male-to-male TS mono design suits audio equipment

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum cable length before signal loss becomes noticeable?

The cable is 1.8 metres (5.9 ft) long, suitable for typical instrument-to-mixer runs without significant signal degradation.

Does the gold-plated 6.35 mm TS plug run hot or add noise during extended sessions?

Gold-plated contacts resist corrosion and maintain low resistance, so the adapter stays cool and adds no audible noise during all-day use.

Which devices must already have 6.35 mm and 3.5 mm TS mono jacks for this cable to work?

You need a source with a 3.5 mm TS mono output and a destination with a 6.35 mm TS mono input, such as a laptop to a mixing console.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.