We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 442036-001 internal power cable

SKU CH-SSMQ-S9D2G

Connects desktop and server components with a 650 W non-modular supply that includes 24-pin, 8-pin, 4-pin, floppy, Molex and SATA connectors

  • Delivers up to 650 W for desktop and server builds
  • 80 PLUS Gold certification reduces energy waste
  • Active PFC improves power factor across 100-240 V input
  • Non-modular design includes 24-pin, 8-pin, 4-pin, SATA, Molex and floppy connectors
  • Condition listed as 95 % new from Mainland China

Ruth's sister 442036-001 internal power cable

This cable connects a 650W power supply to components inside a desktop or server. It carries the 24-pin, 8-pin and 4-pin motherboard connectors plus two floppy, two Molex and four SATA plugs. The assembly is non-modular and built for the XW6600 workstation platform. Buyers who need a different connector mix or a fully modular loom should look elsewhere.

Thermals noise and power draw

The host supply is rated 650W with active PFC and 80 PLUS Gold certification. It accepts 100-127V at 10A or 200-240V at 6A and also lists 118V at 10A. The cable itself adds no active heat or noise; it simply passes the supply's output to the installed hardware. Systems requiring redundant or hot-swap power cabling are not served by this fixed harness.

Connector count and layout

The harness provides one 24-pin, one 8-pin and one 4-pin motherboard connection alongside two floppy 4-pin, two Molex and four SATA power plugs. This exact count determines whether the cable matches the build's drive and motherboard needs. Builds that demand more SATA or Molex heads, or that require PCIe 6+2-pin graphics connectors, cannot use this part.

Highlights

  • Delivers up to 650 W for desktop and server builds
  • 80 PLUS Gold certification reduces energy waste
  • Active PFC improves power factor across 100-240 V input
  • Non-modular design includes 24-pin, 8-pin, 4-pin, SATA, Molex and floppy connectors
  • Condition listed as 95 % new from Mainland China

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 24-pin, 8-pin and 4-pin motherboard plugs on this 650 W cable, and which step do builders often miss?

Plug the 24-pin ATX connector into the main board socket, the 8-pin EPS into the CPU power header, and the 4-pin auxiliary into its matching header; the step most often missed is seating the 4-pin auxiliary because it sits beside the 8-pin and feels optional.

What upkeep or replacement will this non-modular 650 W cable need over time?

The fixed cables cannot be swapped individually; if a SATA, Molex or floppy lead fails the whole harness must be replaced, so inspect connector pins for corrosion during any major hardware change.

What limit appears first when this 650 W Gold unit runs at full load continuously?

The 650 W output ceiling is reached before any thermal or efficiency limit, so sustained draw above 650 W will trigger over-current protection and shut the supply down.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.