We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 3-in-1 LCD Discharger Balancer Meter Tester 2-6S internal power cable

SKU CH-KNJX-EQHEY

Tests, balances and discharges 2-6S LiPo and LiFe packs with an integrated LCD readout

  • Tests 2-6S LiPo/LiFe packs on one LCD
  • Balances cells while you monitor each voltage
  • Discharges batteries safely using internal power
  • Compact cable design fits inside tight builds

3-in-1 LCD Battery Tester for 2-6S Packs

This internal cable integrates a discharger, balancer and digital meter for lithium-polymer and lithium-iron cells. It suits hobbyists and technicians who need to check capacity, balance cells and discharge packs without separate devices. The unit connects directly to the balance lead of 2-6S batteries. No external power supply is required for basic operation.

Practical limits of the balance-lead interface

The tester draws its operating power from the pack under test, so very low-voltage packs may not activate the display. Discharge current is limited by the thin balance wires and internal resistors, making full pack discharge slow. Balancing current is similarly small, so large capacity differences take considerable time to equalise. The device cannot charge batteries or measure internal resistance.

Highlights

  • Tests 2-6S LiPo/LiFe packs on one LCD
  • Balances cells while you monitor each voltage
  • Discharges batteries safely using internal power
  • Compact cable design fits inside tight builds

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick this 2-6S tester or a different cell-count model?

Choose this unit if your packs are 2S to 6S LiPo or LiFe; it will not read 1S or 7S and above.

What does the 2-6S rating tell me when I plug a pack in?

It means the built-in balancer and discharger will safely handle any pack from two to six cells, showing per-cell voltage and total capacity on the LCD.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.