We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black wired microphone with 3.5mm plug and clip

Ruth's sister

Ruth's sister 3.5mm Wired Microphone 0571

SKU CH-JMJG-3GT5E

A 3.5 mm plug-in condenser microphone with a three-metre cable and clip for hands-free car audio use

  • Clear calls with omnidirectional condenser capsule
  • 3 m cable reaches any seat in the vehicle
  • 5 mm plug works with compatible head units
  • Clip and adhesive mount for flexible placement
  • Electret design reduces background noise

3.5 mm wired clip microphone

The Ruth's sister 0571 is a condenser microphone with an omnidirectional pickup pattern and a standard 3.5 mm plug. It is intended for hands-free voice capture in vehicles equipped with a compatible head unit or Bluetooth module that provides a 3.5 mm microphone input. The three-metre cable allows flexible routing to the driver's position without extension leads.

Electret condenser capsule with noise rejection

The electret condenser cartridge delivers high sensitivity and low impedance while suppressing background noise and electrical interference. In normal use the microphone draws negligible power from the host device and adds no audible self-noise to the signal chain. The omnidirectional pattern captures speech evenly when the clip is positioned on a visor, dashboard or headrest.

Clip mount and adhesive pad for permanent

The bundled spring clip lets the microphone be attached to a sun visor or clothing for optimal pickup, while the supplied adhesive pad enables a fixed installation on glass, plastic or metal surfaces. No driver installation or configuration software is required; the device operates immediately on any system with a 3.5 mm mic jack.

Highlights

  • Clear calls with omnidirectional condenser capsule
  • 3 m cable reaches any seat in the vehicle
  • 5 mm plug works with compatible head units
  • Clip and adhesive mount for flexible placement
  • Electret design reduces background noise

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 3.5 mm plug and where should I clip the microphone for best results?

Insert the 3.5 mm plug into the head unit’s microphone input, then clip the microphone to the sun visor or dashboard near the driver’s mouth for clear pickup

What maintenance will the condenser cartridge need over time?

The electret condenser cartridge requires no routine maintenance; keep the capsule free of dust and moisture and avoid bending the 3 m cable sharply

What is the first limitation I will hit during long calls in a noisy cabin?

The omnidirectional pickup will capture road and engine noise alongside your voice, so clarity drops when background sound rises above speech level

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.