Ruth's sister
Ruth's sister 3.5mm 6.35mm to XLR 3Pin Adapter 30cm
Connects 3.5mm and 6.35mm sources to an XLR 3-pin input with a 30cm gold-plated, all-copper, double-shielded cable supporting 48V phantom power
- Connect microphones and mixers with balanced XLR 3-pin and 3.5 mm or 6.35 mm plugs
- Gold-plated contacts resist oxidation for reliable signal transfer
- All-copper 24 AWG conductors with double shielding cut interference and noise
- Threaded 3.5 mm design fits standard, threaded and 6.35 mm adapters for wide compatibility
- Supports 48 V phantom power for professional condenser microphones and wireless systems
Audio Adapter for Balanced Microphone Connections
This 30 cm adapter links 3.5 mm and 6.35 mm microphone or mixer outputs to a male XLR 3‑pin input. It is built for users who need a short, low‑noise bridge between consumer‑style jacks and professional balanced gear. The gold‑plated plugs and all‑copper, double‑shielded 24 AWG cable preserve signal integrity for studio or field recording.
Upgrade from Unshielded Jack‑to‑XLR Cables
The threaded 3.5 mm barrel accepts both plain and threaded female sockets, while the included 6.35 mm converter covers quarter‑inch sources. Swapping to this adapter is worthwhile when phantom‑power‑compatible balanced wiring is required and the standard unshielded cable introduces hum or intermittent contact.
Sustained Use with 48 V Phantom Power
The balanced construction and double‑layer shield maintain consistent noise rejection during long sessions with 48 V phantom power active. The soft, 5.0 mm jacket resists kinking on stage or in a bag, and the gold contacts stay oxidation‑free so the connection remains stable from the first minute to the final take.
Highlights
- Connect microphones and mixers with balanced XLR 3-pin and 3.5 mm or 6.35 mm plugs
- Gold-plated contacts resist oxidation for reliable signal transfer
- All-copper 24 AWG conductors with double shielding cut interference and noise
- Threaded 3.5 mm design fits standard, threaded and 6.35 mm adapters for wide compatibility
- Supports 48 V phantom power for professional condenser microphones and wireless systems
Specifications
No published specifications for this item yet.
Questions about this item
What connector sizes does the 3.5mm end accept?
The threaded 3.5mm plug fits standard 3.5mm female sockets, threaded 3.5mm females and converts to 6.35mm for wider device compatibility.
How do you secure the 3.5mm connection so it does not loosen?
Screw the threaded 3.5mm plug fully into the matching female socket or adapter; the thread locks the joint and prevents accidental unplugging.
Will the gold-plated contacts need cleaning or replacement over time?
Gold plating resists oxidation, so the contacts should not require cleaning or replacement under normal studio use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
