We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium M.2 2280 NVME SSD cooler with thermal pad

Ruth's sister

Ruth's sister 2280 NVME SSD heat sink cooler internal power cable

SKU CH-BNKK-PX60Y

Aluminium heatsink with thermal pad cools 2280 NVME SSDs to prevent throttling

  • Keeps M.2 2280 NVME SSD cool with aluminium radiator and thermal pad
  • Prevents thermal throttling for sustained performance
  • Simple install and removal without tools
  • Durable aluminium construction resists deformation
  • CE certified for safety compliance

Aluminium heatsink for 2280 NVME SSD

This aluminium radiator mounts on a 2280 NVME SSD to draw heat away from the controller and memory. A thermal pad is included to fill the gap between the drive and the cooler. The design increases the dissipation area so the drive stays within safe temperatures during sustained writes. Installation requires no tools and the cooler can be removed just as easily.

Desktop builders with hot-running NVME drives

The cooler suits anyone whose 2280 NVME SSD throttles under heavy workloads such as video editing or large file transfers. It will not help drives that already run cool or systems without physical clearance above the M.2 slot. Laptop users should look elsewhere because the height and mounting method are designed for desktop motherboards.

Included thermal pad simplifies fitting

The supplied pad eliminates the need to source a separate thermal interface material. It covers the controller and NAND packages in one piece so the installer only has to peel the liner and press the heatsink into place. No screws, clips or additional paste are required, cutting installation time to a few seconds.

Highlights

  • Keeps M.2 2280 NVME SSD cool with aluminium radiator and thermal pad
  • Prevents thermal throttling for sustained performance
  • Simple install and removal without tools
  • Durable aluminium construction resists deformation
  • CE certified for safety compliance

Specifications

No published specifications for this item yet.

Questions about this item

What power connector does my motherboard need to run this M.2 2280 NVME SSD cooler?

This aluminium radiator mounts directly on the drive and uses the included thermal pad; it draws no power and needs no motherboard connector.

Will the 9-inch length of this radiator clear the long graphics card I plan to keep?

At 9 inches the cooler spans the full drive length, so measure the gap between your M.2 slot and the GPU back-plate before ordering.

How can I confirm the cooler is lowering my NVME drive temperature after installation?

Compare the drive's SMART temperature in BIOS or a monitoring tool before and after fitting the radiator; a drop of several degrees shows it is working.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.