We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 220W TFX internal power cable

SKU CH-J7D3-CRV5D

220 W TFX power supply with 24-pin ATX, P4, SATA, Molex, floppy and PCIe connectors for desktop or server builds

  • 220 W output supports stable desktop and server operation
  • Active PFC corrects power factor across 100-240 V input
  • 24-pin ATX plus SATA, Molex and PCIe connectors included
  • 100 000 hour MTBF at full load and 25 °C
  • Non-modular TFX form factor fits small-form-factor chassis

Replacement TFX 220W supply

This TFX-form-factor unit delivers 220 W from a non-modular design with active PFC. It fits desktops and servers that use the D2201C0, 504965-001, PC8044, TFX0220D5WA, 504966-001, 504968-001 or S5000 part numbers. The 24-pin ATX, 4-pin P4, three SATA, three Molex, one floppy and one PCIe 6-pin connectors are all fixed. It is a direct swap for lower-wattage TFX units in compatible chassis.

Capacity and headroom

The +12 V rail supplies 19 A while the +5 V and +3.3 V rails provide 14 A and 13 A respectively, with a 2.5 A standby line. Combined output reaches 220 W, giving headroom over 90 W, 100 W, 120 W, 145 W, 150 W, 180 W and 185 W originals. Peak loads beyond 220 W will trip protection, so systems with high-end GPUs or many drives may exceed its limit.

Upgrade scope and limits

It replaces lower-wattage TFX supplies in the listed part-number range, adding stability and upgrade margin for mid-range components. Builders needing more than 220 W, modular cabling, higher 80 PLUS ratings or additional PCIe connectors cannot use this unit. It suits repairs and modest refreshes where the original TFX form factor and connector set must stay identical.

Highlights

  • 220 W output supports stable desktop and server operation
  • Active PFC corrects power factor across 100-240 V input
  • 24-pin ATX plus SATA, Molex and PCIe connectors included
  • 100 000 hour MTBF at full load and 25 °C
  • Non-modular TFX form factor fits small-form-factor chassis

Specifications

No published specifications for this item yet.

Questions about this item

Will the 24-pin ATX connector on this 220W TFX unit fit the motherboard in my older desktop that uses a 20-pin socket?

The cable includes a 24-pin ATX connector wired as 20+4, so the 20-pin portion plugs directly into a legacy 20-pin motherboard socket while the extra 4 pins hang free.

How can I verify the power supply is delivering the rated +12V 19A and +5V 14A after installation?

Measure the +12V and +5V rails with a multimeter under load; they should read close to 12 V and 5 V respectively, and the system should remain stable up to the 220 W total output.

Does the package include SATA power cables or do I need to buy them separately?

Three SATA 15-pin connectors are already attached to the non-modular cable harness, so no separate SATA power cables are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.