We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten USB 3.0 PCIe 1x to 16x riser cables with 6-pin power connectors

Ruth's sister

Ruth's sister 10pcs USB 3.0 PCIe 1x to 16x riser cable 6pin

SKU CH-TEQK-FBAGG

Pack of ten USB 3.0 riser cables converting one PCIe lane into sixteen with 6-pin power

  • 10-piece kit equips multiple GPU slots for mining rigs
  • USB 3.0 interface carries PCIe 1x-to-16x signals between board and card
  • 6-pin power connector supplies auxiliary current to each riser
  • 16x mechanical slot accepts full-length graphics cards

10-piece USB 3.0 PCIe 1x to 16x riser kit

This set contains ten riser cables that convert a single PCIe 1x slot into a 16x physical connector using a USB 3.0 link. Each cable includes a 6-pin power input for the attached card. The kit is aimed at builders assembling multi-GPU mining rigs or test benches where board space is limited. It is not suited for users who need native 16-lane bandwidth or server-grade signal integrity.

Thermals noise and power draw

The risers themselves are passive and generate no audible noise. Power for the graphics card is supplied through the 6-pin connector, so system power draw depends entirely on the installed GPU. Typical operation adds no measurable heat beyond the graphics card’s own output. No active cooling is required for the cables.

Highlights

  • 10-piece kit equips multiple GPU slots for mining rigs
  • USB 3.0 interface carries PCIe 1x-to-16x signals between board and card
  • 6-pin power connector supplies auxiliary current to each riser
  • 16x mechanical slot accepts full-length graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the USB 3.0 PCIe 1x to 16x riser cables with the 6-pin power connectors?

Plug each 1x end into a motherboard PCIe slot, connect the 6-pin power from the PSU to the riser board, then seat the graphics card into the 16x socket on the riser; the step often missed is powering the riser before the GPU.

What maintenance or replacement will the 10-piece riser kit need over time?

Inspect the USB 3.0 cables and 6-pin connectors periodically for dust or loose seating; replace any cable that shows signal loss or physical wear on the connector pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.