Ruth's sister
Ruth's sister 10pcs Aluminum Heatsink 11x11x5mm
Ten aluminium heatsinks measuring 11 mm square by 5 mm high for cooling electronic chips
- Ten-piece pack covers multiple chips or a single board
- Aluminium construction transfers heat away from sensitive components
- 11 mm square footprint fits tight spaces on dense PCBs
- Low 5 mm profile clears low-clearance enclosures and expansion cards
- Brand-new parts arrive free of oxidation or prior thermal paste residue
10-piece aluminum heatsink kit
This kit supplies ten aluminum heatsinks measuring 11 by 11 by 5 millimetres. They are intended for electronic chips that need passive heat dissipation. The small footprint suits tight board layouts. Hobbyists and repair technicians will find the quantity convenient for multiple projects.
Replaces adhesive thermal pads
These metal fins replace basic thermal pads when a component runs hotter than adhesive material can handle. The upgrade is worthwhile when a voltage regulator or similar chip throttles under sustained load. They attach directly to the package without mounting hardware.
Handles low-power chip cooling
The 11 mm square base covers typical surface-mount regulators and small ICs. Ten pieces give enough headroom for a full board rework or several separate builds. They run out of capacity on high-wattage processors or large power stages that demand active airflow.
Highlights
- Ten-piece pack covers multiple chips or a single board
- Aluminium construction transfers heat away from sensitive components
- 11 mm square footprint fits tight spaces on dense PCBs
- Low 5 mm profile clears low-clearance enclosures and expansion cards
- Brand-new parts arrive free of oxidation or prior thermal paste residue
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does each 11x11x5mm heatsink need above the chip?
Each heatsink measures 11 by 11 millimetres at the base and stands 5 millimetres tall, so allow at least that much vertical space above the component.
What is the correct way to attach these aluminium heatsinks to a voltage regulator?
Clean the regulator surface, apply a thin layer of thermal compound, press the heatsink firmly into place and let the adhesive cure before powering on.
When should the thermal compound under these heatsinks be replaced?
Reapply thermal compound whenever a heatsink is removed or if temperatures rise noticeably after extended use; the aluminium fins themselves do not wear out.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114223BTC
In stock
