We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular fan hub with eight 3-pin headers and Molex power input

Ruth's sister

Ruth's sister 0626 international power cord

SKU CH-905H-7SZ5B

A 1-to-8 fan hub powers up to eight 12 V 3-pin fans from a single SATA or IDE connector with manual high/low/off speed control

  • Connect up to eight 12 V 3-pin fans from one hub
  • Power the hub via IDE or SATA connectors
  • Manual speed switch selects full, low or off
  • Compact 53×48 mm board fits tight chassis spaces
  • Double-sided EVA adhesive secures the hub in place

Fan Hub for Eight 3-Pin Fans

This adapter expands a single 4-pin Molex connection into eight 3-pin fan headers. It is built for 12 V fans and draws power from either an IDE or SATA connector. The compact board measures 53 by 48 mm and includes double-sided adhesive for chassis mounting.

Builders Needing Manual Speed Control

The hub suits users who want to start up to eight fans simultaneously without motherboard headers. It offers a physical switch for high speed, low speed or off. Buyers who require automatic PWM regulation or RPM monitoring should look elsewhere, as those functions are absent.

Two Power Input Options

The card accepts either a legacy IDE plug or a SATA plug to deliver 12 V to all eight channels. This flexibility lets the hub work with older and newer power supplies alike.

Highlights

  • Connect up to eight 12 V 3-pin fans from one hub
  • Power the hub via IDE or SATA connectors
  • Manual speed switch selects full, low or off
  • Compact 53×48 mm board fits tight chassis spaces
  • Double-sided EVA adhesive secures the hub in place

Specifications

No published specifications for this item yet.

Questions about this item

What power connectors does my power supply need to run the 1-to-8 fan hub?

The hub draws power from either a standard 4-pin Molex (IDE) connector or a SATA power connector on your PSU.

Will the hub control the speed of the 3-pin fans already installed in my case?

You can manually switch all eight fans between full speed, low speed or off, but there is no automatic PWM or RPM sensing.

How do I confirm the hub is delivering power to all eight fan headers after installation?

Set the switch to the high-speed position; every connected 12 V 3-pin fan should spin up immediately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.