We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PCIe 1x to 16x riser card with 60cm USB 3.0 cable and 6-pin power

Ruth's sister

Ruth's sister 009s internal power cable 60cm

SKU CH-XH86-KGH04 MPN 009s

A 60 cm PCIe 1x to 16x riser cable with a 6-pin power connector and USB 3.0 link for mounting a graphics card away from the motherboard

  • Extends GPU reach with 60 cm flexible cable
  • 16 A power capacity supports demanding video cards
  • USB 3.0 link ensures stable data transfer
  • Blue Taijin and PCEA build resists wear
  • 67 g lightweight design eases case routing

PCI-E 1x to 16x riser with 60 cm cable

The Golden 009S VER009 adapter extends a single PCI-E 1x slot to a full 16x connector for graphics-card mounting. It draws power through a 6-pin interface rated for 16 A, delivering extra current to the card. The 60 cm USB 3.0 cable allows flexible placement inside mining rigs or compact builds. The blue Taijin-and-PCEA assembly weighs 67 g and ships in an anti-static bag.

60 cm length gives routing headroom in tight chassis

At 60 cm the cable reaches across mid-tower cases and open-air frames without strain, while the 30 cm and 100 cm variants suit smaller or larger layouts. The 16 A power rating supports most mainstream GPUs under continuous 24-hour loads. Very high-draw cards or multi-GPU arrays may exceed the single 6-pin limit, so builders needing more current should verify their card specifications.

USB 3.0 cable and one-month guarantee included

A USB 3.0 data cable is bundled for the 1x-to-16x signal link, and the supplier backs the unit for one month as a consumable item. No driver discs, mounting brackets or additional power adapters are provided. Systems running Linux, Windows XP, 7, 8 or 10 are supported without extra software.

Highlights

  • Extends GPU reach with 60 cm flexible cable
  • 16 A power capacity supports demanding video cards
  • USB 3.0 link ensures stable data transfer
  • Blue Taijin and PCEA build resists wear
  • 67 g lightweight design eases case routing

Specifications

No published specifications for this item yet.

Questions about this item

Will the 60 cm USB 3.0 cable reach my GPU if the motherboard PCI-E 1x slot is near the bottom of an ATX case?

The 60 cm cable spans most ATX layouts; route it behind the motherboard tray and measure from the bottom PCI-E 1x slot to the GPU mounting point before ordering.

How can I verify the 009s riser is delivering power to my graphics card after installation?

Power on the system, check that the GPU fans spin and the card is detected in BIOS or OS device manager, then run a benchmark to confirm stable operation under load.

Does the package include the 6-pin power adapter for the riser board or must I buy it separately?

The box contains the riser board, a 60 cm USB 3.0 cable, and a 6-pin power connector on the board itself; no separate power adapter is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.