We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Rocstor

Rocstor Y10C425GY Cat.6 network ethernet cable 20 ft

SKU CH-EPSV-1R06A MPN Y10C425GY

Category 6 patch cable with RJ-45 connectors spans 20 ft for 10 Gbit/s networking

  • Cat.6 rating supports 10 Gbit/s data transfer
  • 20 ft length reaches across rooms or racks
  • Snagless boots protect RJ-45 clips during frequent moves
  • Stranded 24 AWG copper conductors stay flexible for tight bends
  • PoE compatible to power devices through the cable

Rocstor Cat.6 patch cable, 20 ft length

This twenty-foot Category 6 patch cable connects network devices with RJ-45 male connectors on both ends. The stranded copper conductors are rated for 10 Gbit/s data transfer and carry Power over Ethernet. A snagless boot protects the latch during repeated insertion and removal. The grey jacket uses 24 AWG unshielded construction.

Suitable for standard PoE runs between switches.

Buyers who need shielded cabling for electrically noisy environments should look elsewhere. Installers requiring a different length or colour must choose another variant. The unshielded design does not meet specifications that mandate foil or braid screening.

10 Gbit/s rated Category 6 performance

The cable is tested to the Category 6 standard with a 10 Gbit/s transfer rate over its full twenty-foot span. This single figure determines whether the link will handle the intended bandwidth without degradation.

Highlights

  • Cat.6 rating supports 10 Gbit/s data transfer
  • 20 ft length reaches across rooms or racks
  • Snagless boots protect RJ-45 clips during frequent moves
  • Stranded 24 AWG copper conductors stay flexible for tight bends
  • PoE compatible to power devices through the cable

Specifications

No published specifications for this item yet.

Questions about this item

Is the 20 ft length right for my desk-to-router run, or should I pick a different size?

The cable is 20 ft end-to-end; choose a shorter length if your devices are closer together to avoid excess slack, or a longer one if the run exceeds 20 ft.

The box says 10 Gbit/s — will I actually see that speed on my home network?

10 Gbit/s is the cable's rated maximum; real-world throughput depends on your router, switch, NICs and any PoE negotiation, so you may see lower speeds if other hardware limits the link.

Does the RJ-45 Cat 6 connector work with my existing gigabit switch and PoE devices?

Yes, the RJ-45 male plugs are backward compatible with Cat 5e and Cat 5 ports, and the cable supports PoE, so it will carry both data and power to compatible devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.