We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver anodised aluminium wheel spacers, 25mm thick, 4x110 bolt pattern, 74.1mm centre bore

RockTrix

RockTrix 1.0" 4x110 74.1mm 10x1.25 Spacers 25mm Silver 2pcs

SKU CH-7MGV-A0QNH

Pair of 25 mm aluminium wheel spacers with 4×110 bolt pattern, 74.1 mm centre bore and M10×1.25 studs

  • Wider stance improves stability with 25 mm spacers
  • Precise 4x110 bolt pattern matches vehicle hubs
  • 1 mm centre bore ensures hub-centric fit
  • M10×1.25 studs included for direct installation
  • Aerospace billet aluminium resists corrosion through anodising

Vehicle fitment

These 25 mm aluminium spacers suit ATVs and UTVs with a 4x110 bolt pattern, a hub centre bore up to 74.1 mm and M10x1.25 wheel studs. The listed models include machines from Bombardier, Honda, Suzuki and Yamaha across engine sizes from 250 to 700. Buyers whose vehicle uses a different bolt pattern, larger hub bore or alternative stud thread cannot use this set.

Capacity and headroom

Each spacer adds 25 mm of track width per wheel, giving extra clearance for wider tyres or aftermarket wheels without changing suspension geometry. The pair covers one axle only; a full four-corner installation requires two sets. Vehicles with stock wheels and no clearance issues will see no benefit.

Build integration

The spacers are CNC machined from aerospace billet aluminium and anodised for corrosion resistance. They bolt directly to the existing hub using the supplied 10x1.25 studs and nuts, so no extended studs or hub-centric rings are needed. Installation is limited to machines that match every fitment specification exactly.

Highlights

  • Wider stance improves stability with 25 mm spacers
  • Precise 4x110 bolt pattern matches vehicle hubs
  • 1 mm centre bore ensures hub-centric fit
  • M10×1.25 studs included for direct installation
  • Aerospace billet aluminium resists corrosion through anodising

Specifications

BrandRockTrix

Questions about this item

Will the 25 mm thickness push my stock 10x1.25 studs past the lug nuts on a 4x110 hub?

The spacers add 25 mm of offset and use the existing 10x1.25 studs; you must verify that your wheel’s lug nuts still achieve full thread engagement after the extra width.

How can I confirm the 74.1 mm centre bore seats correctly on my hub before torquing the wheels?

Slide each spacer onto the hub — the 74.1 mm bore should sit flush against the hub face with no gap; any rocking means the hub lip is too large for these spacers.

Does the two-piece set include new 10x1.25 studs and lug nuts, or do I reuse the factory hardware?

The package contains only the two CNC-machined billet-aluminium spacers; you reuse your vehicle’s original 10x1.25 studs and lug nuts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.