We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA power splitter cable with one male and five female connectors in a flat parallel layout

RIITOP

RIITOP SATA 1-to-5 Power Splitter Cord 60 cm 18 AWG Black

SKU CH-HWMG-8FFQG

Splits one SATA power connector into five for HDDs, SSDs and optical drives using 18 AWG cable

  • ColorBlack

Pack 1 Pack

  • Connect up to five SATA drives from one power connector
  • Parallel flat cable layout keeps the case tidy and improves airflow
  • 18 AWG conductors deliver reliable power to HDDs, SSDs and optical drives
  • One-piece moulded connectors prevent degumming and ensure a secure fit
  • 60 cm total length with staggered 20 cm and 10 cm branches for flexible routing

One-to-Five SATA Power Splitter

This new RIITOP cable turns a single 15-pin SATA power connector into five female ports. The flat, parallel layout spaces the connectors at 20 cm for the first branch and 10 cm for each of the next four. An 18 AWG wire runs the full 60 cm length in black insulation. It is built for adding multiple drives without rewiring the PSU.

Suits builders adding several SATA drives

This splitter works when a power supply has a spare SATA lead and the case can accommodate five devices. It will not help if the PSU lacks a SATA connector or if the drives use a different power interface. Builders needing more than five connections or a different connector type should look at other solutions.

18 AWG wire gauge

The cable uses 18 AWG conductors across all five branches. This gauge determines how much current each drive can draw safely, so it is the key figure to check against the power requirements of the connected SSDs, HDDs or optical drives.

Highlights

  • Connect up to five SATA drives from one power connector
  • Parallel flat cable layout keeps the case tidy and improves airflow
  • 18 AWG conductors deliver reliable power to HDDs, SSDs and optical drives
  • One-piece moulded connectors prevent degumming and ensure a secure fit
  • 60 cm total length with staggered 20 cm and 10 cm branches for flexible routing

Specifications

ColorBlack

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What spacing do the 10 cm branch leads give between each SATA drive connector?

The four 10 cm branches space the five 15-pin SATA female connectors evenly so drives sit side by side without cable clutter.

How do I plug the splitter into the power supply without bending the 15-pin male connector?

Align the keyed 15-pin SATA male plug with the PSU port and press straight in; forcing it at an angle can bend the pins.

When should I replace the 18 AWG cable if the insulation looks worn?

Replace the splitter immediately if the black jacket shows cracks or the 15-pin connectors feel loose, as damaged 18 AWG wiring can cause power loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.