We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single 12V 7A sealed lead-acid battery in plastic housing

RefurbUPS

RefurbUPS TrippLite BC PRO 675 V1 compatible ups replacement battery kit 12V7A RBC51

SKU CH-6YAB-PA75V

A 12 V 7 A sealed-lead-acid battery kit replaces the cartridge in a Tripp Lite BC PRO 675 UPS and matches the RBC51 specification

  • TypeKit/Package
  • Weight6
  • High-rate 12 V 7 A discharge for reliable backup
  • Single 12 V 7 A SLA cell keeps weight low
  • Factory-fresh stock ensures immediate installation readiness
  • Comprehensive instructions simplify DIY replacement
  • RBC51 compatibility guarantees correct fit for BCPRO 675 V1

Compatible Battery Kit for Tripp Lite BC PRO 675 V1

This replacement battery kit is designed for the Tripp Lite BC PRO 675 V1 UPS. It contains a single 12V 7A sealed lead-acid battery cartridge that matches the original RBC51 specification. The kit suits administrators who need a direct, factory-fresh swap to restore backup runtime without modifying the UPS chassis.

Thermals Noise and Power Draw in Normal Use

The sealed lead-acid cell operates silently because it has no moving parts or cooling fans. During float charge it draws only a small trickle current from the UPS charger, adding negligible heat to the rack or tower environment. Normal self-discharge is low, so the battery holds its charge for extended periods when the UPS is idle.

Behaviour Under Sustained Load

Under a prolonged discharge the high-rate design delivers steady current until the UPS reaches its low-voltage cutoff. Voltage remains stable through the discharge curve, giving the connected equipment consistent power for the full rated runtime. After a deep discharge the battery recovers fully when the UPS returns to mains charging, ready for the next outage.

Highlights

  • High-rate 12 V 7 A discharge for reliable backup
  • Single 12 V 7 A SLA cell keeps weight low
  • Factory-fresh stock ensures immediate installation readiness
  • Comprehensive instructions simplify DIY replacement
  • RBC51 compatibility guarantees correct fit for BCPRO 675 V1

Specifications

BrandTrippLite BC PRO
SeriesTrippLite BC PRO Batteries
TypeKit/Package
Weight6

Questions about this item

How do I install the 12 V 7 A battery kit in my Tripp Lite BCPRO 675 V1 UPS, and which step do people usually miss?

Power off and unplug the UPS, open the battery door, disconnect the old cartridge, connect the new 12 V 7 A battery observing the polarity marks, close the door, then power on and run a self-test — the step most often skipped is the self-test.

What maintenance or replacement will the 12 V 7 A SLA battery need later?

Expect to replace the sealed lead-acid battery again in three to five years; no watering or equalising is required, just keep the UPS in a cool, ventilated spot and run the self-test quarterly.

What limit appears first when the BCPRO 675 V1 runs on this battery during a long outage?

The 7 Ah capacity sets the runtime ceiling; once the stored charge is depleted the UPS will shut down, so plan loads to stay within the rated backup time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.