We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single 12V 9A sealed lead-acid battery cartridge in plastic case

RefurbUPS

RefurbUPS SP013 12V9A UPS Replacement Battery Kit

SKU CH-QF37-6PF9A

A compatible replacement kit containing one 12V9A sealed lead-acid battery for UPS units

  • TypeKit/Package
  • Weight7
  • Compatible 12 V 9 A SLA battery fits Smart Power Systems SP013 UPS
  • High-rate discharge design delivers reliable backup power when mains fail
  • Factory-fresh cells ensure full capacity from first charge
  • Kit includes one battery plus step-by-step installation instructions
  • Drop-in replacement restores UPS runtime without modification

CyberPower 12V9A UPS Battery Kit

This kit provides a direct replacement cartridge for Smart Power Systems SP013 units. It contains one factory-fresh 12V9A sealed lead-acid battery rated for high-rate discharge. Comprehensive installation instructions are included so technicians can swap the cell quickly and restore backup power.

SLA Chemistry Limits Runtime And Cycle Life

Sealed lead-acid cells deliver strong surge current but offer lower energy density than lithium alternatives. They require periodic recharging during storage and degrade faster when subjected to deep discharges or elevated ambient temperatures. The kit restores original runtime but does not extend it beyond the UPS design specification.

Single 12V9A Block Determines Compatibility

The cartridge supplies exactly one 12V9A block, so it fits only UPS models engineered for that voltage and capacity. Systems needing multiple blocks, different voltages or higher ampere-hour ratings cannot use this kit. Verify the original battery label before ordering to avoid a mismatch.

Highlights

  • Compatible 12 V 9 A SLA battery fits Smart Power Systems SP013 UPS
  • High-rate discharge design delivers reliable backup power when mains fail
  • Factory-fresh cells ensure full capacity from first charge
  • Kit includes one battery plus step-by-step installation instructions
  • Drop-in replacement restores UPS runtime without modification

Specifications

BrandCyberPower
SeriesSmart Power Systems Batteries
TypeKit/Package
Weight7

Questions about this item

Should I choose the 12V9A kit or a different voltage for my UPS?

Select the 12V9A kit only if your UPS requires a 12 volt 9 amp-hour battery; check the original battery label or manual to confirm the exact voltage and capacity match.

What does the 12V9A rating mean once the battery is installed in my UPS?

It delivers 12 volts at a 9 amp-hour capacity, determining how long the UPS can power connected equipment during an outage before the battery is depleted.

Which interface or standard does the SP013 battery use, and what does it limit in practice?

The battery connects via the UPS's standard internal terminal posts, so the UPS chassis and its charging circuit set the practical current and runtime limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.