RefurbUPS
RefurbUPS PW5115-500RM Compatible UPS Replacement Battery Kit
Compatible replacement battery kit containing two 6V9A sealed lead-acid batteries for Powerware PW5115-500RM UPS units
- TypeKit/Package
- Weight8
- Compatible kit for PW5115-500RM UPS
- Two 6V9A high-rate SLA batteries included
- Factory-fresh cells for reliable backup power
- Installation instructions provided for easy replacement
- Ready for immediate shipment to minimise downtime
Compatible Kit for PW5115-500RM
This RefurbUPS kit supplies two factory-fresh 6V9A sealed lead-acid batteries that match the original Powerware PW5115-500RM cartridge. It restores backup power to the UPS unit without modification.
Suits owners of the PW5115-500RM needing a direct
The kit is built only for that specific UPS model. Buyers with different Powerware or Eaton units, or those requiring higher capacity or alternative chemistries, should look at something else.
Drops into the existing battery compartment
No extra hardware or wiring changes are needed beyond the included instructions. The replacement frees the UPS to deliver its rated runtime again once the fresh cells are seated.
Highlights
- Compatible kit for PW5115-500RM UPS
- Two 6V9A high-rate SLA batteries included
- Factory-fresh cells for reliable backup power
- Installation instructions provided for easy replacement
- Ready for immediate shipment to minimise downtime
Specifications
| Brand | Eaton / Powerware |
|---|---|
| Series | Eaton / Powerware Batteries |
| Type | Kit/Package |
| Weight | 8 |
Questions about this item
Which UPS model must I already own for this replacement battery kit to fit?
The kit is compatible with the Powerware PW5115-500RM UPS, so you must own that exact model for the batteries to fit and function correctly.
Will the two 6V9A batteries in this kit work with the original charger circuitry in my older PW5115-500RM unit?
Yes, the 6V9A SLA batteries match the original specification, so the existing charger in the PW5115-500RM will charge them normally without modification.
After installing the two 6V9A batteries, how can I verify the UPS is working as intended?
Power on the UPS, let it charge fully, then run a self-test or simulate a mains failure; the unit should hold the load and report healthy battery status.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



