We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two sealed 12V 9Ah lead-acid batteries in cardboard packaging

RefurbUPS

RefurbUPS PP1100SW 12V9A 2-pack UPS replacement battery

SKU CH-P038-JR0SX

Contains two 12 V 9 Ah sealed-lead-acid batteries compatible with CyberPower PP1100SW UPS units

  • TypeKit/Package
  • Weight14
  • Two 12 V 9 Ah batteries deliver extended runtime
  • Kit matches CyberPower PP1100SW specifications for direct fit
  • Factory-fresh sealed lead-acid cells ensure reliable backup power
  • 14 kg package ships ready for immediate installation
  • Includes step-by-step replacement instructions for quick setup

Two-pack 12 V 9 Ah UPS battery kit

This kit supplies two sealed lead-acid batteries rated at 12 volts and 9 ampere-hours each. They are built as direct replacements for the CyberPower PP1100SW cartridge used in compatible Smart App UPS units. The pack arrives factory-fresh and includes printed installation instructions. It is intended for administrators who need to restore runtime on an existing UPS without sourcing individual cells.

Replaces a depleted PP1100SW cartridge

Swapping the pair restores the original backup capacity when the UPS signals a battery fault or runtime has dropped below acceptable levels. The jump is worth it when the current cells no longer hold charge through a typical outage window or when preventive replacement is scheduled per the manufacturer’s service interval. No firmware update or hardware modification is required beyond the physical swap.

Verify the UPS model accepts PP1100SW cartridges

Confirm that your unit lists the PP1100SW as a compatible replacement before ordering. Check that the battery bay accommodates two 12 V 9 Ah blocks in the existing wiring harness. Ensure you have the basic tools and safety clearance to disconnect the old cartridge and connect the new one following the included instructions.

Highlights

  • Two 12 V 9 Ah batteries deliver extended runtime
  • Kit matches CyberPower PP1100SW specifications for direct fit
  • Factory-fresh sealed lead-acid cells ensure reliable backup power
  • 14 kg package ships ready for immediate installation
  • Includes step-by-step replacement instructions for quick setup

Specifications

BrandCyberPower
SeriesCyberPower Smart App Batteries
TypeKit/Package
Weight14

Questions about this item

What physical space does the 12V9A battery pair require inside a CyberPower UPS?

The kit contains two 12V9A sealed lead-acid cells that match the original cartridge dimensions for CyberPower Smart App UPS models using the PP1100SW kit.

Which step in the replacement instructions is most often missed when swapping the 1100 series cartridge?

Reconnecting the internal battery connector and resetting the UPS battery timer after installing the two 12V9A cells is the step users frequently skip.

When will the 12V9A sealed lead-acid cells need replacing again under normal use?

Expect three to five years of service before the 12V9A batteries require another swap, depending on discharge cycles and ambient temperature.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.