We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three rectangular 12V 7A sealed lead-acid batteries in a kit

RefurbUPS

RefurbUPS MGE Pulsar EX 10 12V7A 3-battery kit

SKU CH-72RD-ASN08

Three 12V 7A sealed-lead-acid batteries replace the MGE Pulsar EX 10 UPS cartridge

  • TypeKit/Package
  • Weight18
  • Three high-rate 12V 7Ah batteries power the MGE Pulsar EX 10 UPS
  • Factory-fresh sealed lead-acid cells deliver reliable backup performance
  • Kit weighs 18 kg for straightforward handling and installation
  • Includes comprehensive step-by-step replacement instructions
  • Compatible replacement kit restores UPS runtime to original specification

Eaton-MGE Pulsar EX 10 Compatible Kit

This kit provides three 12V7A sealed lead-acid batteries designed as a direct replacement for the Eaton-MGE Pulsar EX 10 uninterruptible power supply. It is intended for IT administrators and facility managers who need to restore backup runtime on an existing unit. The package arrives factory fresh and includes comprehensive installation instructions for a straightforward swap.

Valve-Regulated Lead-Acid Constraints

The batteries use valve-regulated lead-acid chemistry, which delivers high-rate discharge for short-term power bridging but degrades with deep cycling or prolonged storage in a discharged state. Runtime is limited by the 7 Ah capacity per cell and the UPS load; the chemistry also requires upright mounting and operates within a defined temperature window to reach its design life.

Replaces Aged Original Cartridges

This kit replaces the original battery cartridge when runtime has fallen below acceptable levels or when the UPS signals a battery fault. The jump is worth it when the existing set no longer holds sufficient charge to cover the protected equipment during an outage. It is not suitable for expanding capacity beyond the UPS design or for units that require a different voltage or form factor.

Highlights

  • Three high-rate 12V 7Ah batteries power the MGE Pulsar EX 10 UPS
  • Factory-fresh sealed lead-acid cells deliver reliable backup performance
  • Kit weighs 18 kg for straightforward handling and installation
  • Includes comprehensive step-by-step replacement instructions
  • Compatible replacement kit restores UPS runtime to original specification

Specifications

BrandMGE
SeriesMGE UPS Batteries
TypeKit/Package
Weight18

Questions about this item

Which kit version should I pick for the Pulsar EX 10?

The kit contains three 12V7A sealed lead-acid batteries wired for the Pulsar EX 10.

What runtime can I expect from the 12V7A set once installed?

The three 12V7A blocks restore the original 7 Ah capacity the EX 10 was designed for.

Does the kit use a standard battery connector or a proprietary interface?

Each block uses the standard F2 faston tabs found on the original EX 10 cartridges.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.