We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four sealed 12V 7Ah lead-acid batteries in a kit

RefurbUPS

RefurbUPS MGE Pulsar ESV22 UPS Replacement Battery Kit 4x12V7A

SKU CH-TYAW-82S5C

Kit of four 12 V 7 Ah sealed lead-acid batteries for MGE Pulsar ESV22 UPS, new condition, 24 kg total weight

  • TypeKit/Package
  • Weight24
  • Four 12 V 7 A SLA batteries power the MGE Pulsar ESV22 UPS
  • Factory-fresh cells deliver reliable backup when mains power fails
  • High-rate discharge design supports demanding server loads during outages
  • Kit includes comprehensive installation instructions for straightforward replacement
  • 24 kg total weight reflects robust lead-acid construction for long service life

Compatible Kit for MGE Pulsar ESV22 UPS

This replacement kit supplies four 12V7A sealed lead-acid batteries designed for the MGE Pulsar ESV22 uninterruptible power supply. It restores backup power for servers and network gear that rely on this specific UPS model. Buyers needing a different voltage, capacity, or form factor should select another kit.

Pre-wired Cartridge with Included Instructions

The batteries arrive as a factory-fresh cartridge set with comprehensive installation instructions, so no soldering or custom wiring is required. Installers must still power down the UPS, observe correct polarity, and dispose of the old cells properly. Technicians unfamiliar with high-rate discharge SLA handling should consult a qualified electrician.

Limited to 12 V 7 Ah SLA Chemistry

The kit uses sealed lead-acid cells rated at 12 volts and 7 ampere-hours, which fixes the energy capacity and discharge profile for the ESV22 chassis. Runtime cannot be extended by mixing higher-capacity cells, and the chemistry demands periodic replacement as capacity fades. Users requiring lithium chemistry or longer runtime must choose a different UPS platform.

Highlights

  • Four 12 V 7 A SLA batteries power the MGE Pulsar ESV22 UPS
  • Factory-fresh cells deliver reliable backup when mains power fails
  • High-rate discharge design supports demanding server loads during outages
  • Kit includes comprehensive installation instructions for straightforward replacement
  • 24 kg total weight reflects robust lead-acid construction for long service life

Specifications

BrandMGE
SeriesMGE UPS Batteries
TypeKit/Package
Weight24

Questions about this item

How do I confirm the RefurbUPS MGE Pulsar ESV22 kit is working after installation?

Follow the included installation instructions, then run a self-test on the UPS to verify the four 12V7A batteries hold charge and support the load.

What is included in the box and what must I purchase separately?

The kit contains four 12V7A SLA batteries and comprehensive installation instructions; no additional components are required for the ESV22 replacement.

Which capacity kit should I choose for my MGE Pulsar ESV22 UPS?

This 12V7A four-battery kit matches the original specification for the ESV22 model and weighs 24 units.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.