We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four 12V 9A sealed lead-acid batteries in a 48V tray kit, 28kg

RefurbUPS

RefurbUPS GXT4 9A 48V Tray ups replacement battery kit 12V9A 4 batteries 28kg

SKU CH-5QXY-MJRPY

Compatible replacement kit holds four 12V 9Ah sealed lead-acid batteries for the Liebert GXT4 9A 48V UPS tray

  • TypeKit/Package
  • Weight28
  • Four 12 V 9 Ah batteries supply 48 V backup power
  • Kit weighs 28 kg for stable rack mounting
  • Factory-fresh sealed lead-acid cells deliver reliable runtime
  • Includes step-by-step installation instructions for quick swap
  • Compatible with Liebert GXT4 9 A UPS models

Kit Contents

This kit contains four 12V 9A sealed lead-acid batteries assembled on a single tray for the Liebert GXT4 9A 48V UPS. It is designed for IT administrators who need a direct replacement when the original cells reach end of life.

When to Replace

The tray replaces the factory battery cartridge once runtime has fallen below the level required by the protected load. Swapping the complete kit is worthwhile when the UPS reports a battery fault or when preventive maintenance schedules call for fresh cells.

Installation Fit

The pre-wired tray slides into the UPS battery compartment without additional cabling, freeing the installer from handling loose cells. The package includes step-by-step installation instructions so the swap can be completed during a planned maintenance window.

Highlights

  • Four 12 V 9 Ah batteries supply 48 V backup power
  • Kit weighs 28 kg for stable rack mounting
  • Factory-fresh sealed lead-acid cells deliver reliable runtime
  • Includes step-by-step installation instructions for quick swap
  • Compatible with Liebert GXT4 9 A UPS models

Specifications

BrandLiebert
SeriesLiebert BATKIT Replacement
TypeKit/Package
Weight28

Questions about this item

What voltage and battery count does the GXT4 9A 48V tray require?

The tray uses four 12 V 9 A batteries wired in series to deliver 48 V to the UPS.

Which step in the replacement procedure is most often missed?

Installers frequently forget to tighten the tray mounting screws after seating the battery pack, leaving the cartridge loose in the chassis.

When should the four 12 V 9 A batteries be replaced?

Replace the set when the UPS reports reduced runtime or a battery fault alarm, typically after three to five years of normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.