We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sealed lead-acid battery block, rectangular black plastic case, two terminals on top

RefurbUPS

RefurbUPS B&B BP7.5-12 T2 UPS Replacement Battery 12V 7.5Ah

SKU CH-ZX60-F2X0Z

A 12 V 7.5 Ah sealed lead-acid replacement battery cartridge for UPS units

  • TypeKit/Package
  • Weight6
  • 12 V 7.5 Ah SLA cell powers critical UPS systems
  • High-rate discharge chemistry sustains heavy loads during outages
  • Factory-fresh stock ensures maximum service life from day one
  • Single-battery cartridge fits directly into compatible UPS units
  • Included installation guide enables quick, error-free replacement

Compatible 12 V 7.5 Ah replacement cartridge

This cartridge is a direct replacement for UPS units that use the B&B BP7.5-12 T2 form factor. It supplies a single 12 V 7.5 Ah sealed lead-acid cell rated for high-rate discharge. The kit is intended for administrators maintaining existing UPS hardware. It is not for buyers who need a different voltage or capacity.

Sealed lead-acid chemistry runs without active

The battery operates silently because it has no moving parts and generates minimal heat during normal float or discharge cycles. Power draw is limited to the self-discharge characteristic of the chemistry. No fan noise or thermal management is required in the host UPS. It is not for installations that demand lithium-ion energy density.

Includes installation instructions only

The package provides comprehensive step-by-step guidance for safely swapping the old cartridge. No additional cables, mounting brackets or monitoring software are bundled. The instructions cover terminal orientation and torque basics. It is not for users who expect a hot-swap tray or network management integration.

Highlights

  • 12 V 7.5 Ah SLA cell powers critical UPS systems
  • High-rate discharge chemistry sustains heavy loads during outages
  • Factory-fresh stock ensures maximum service life from day one
  • Single-battery cartridge fits directly into compatible UPS units
  • Included installation guide enables quick, error-free replacement

Specifications

BrandB & B Battery
SeriesB & B Battery
TypeKit/Package
Weight6

Questions about this item

How do I install the B&B BP7.5-12 T2 battery in my UPS, and which step is most often done incorrectly?

Disconnect the UPS from mains power, remove the old cartridge, connect the new battery terminals observing the correct polarity, and secure the cover; the step most often missed is tightening both terminal bolts fully.

What maintenance will the 12V 7.5Ah sealed lead-acid battery need, and when should I plan a replacement?

The sealed design needs no watering or electrolyte checks; plan to replace the unit when backup runtime falls noticeably below the original level, typically after several years of float service.

What is the first limitation that appears when the 12V 7.5Ah battery runs under sustained high-rate discharge?

Voltage drops as internal resistance rises with heat, reducing available runtime before the UPS low-voltage shutdown triggers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.