We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two rectangular 12V 9A sealed lead-acid batteries in a kit

RefurbUPS

RefurbUPS 9125 700i UPS Replacement Battery Kit 12V 9A 2pcs

SKU CH-TF5J-KDY4A

Kit of two 12 V 9 A sealed lead-acid batteries compatible with Eaton 9125 700i UPS units

  • TypeKit/Package
  • Weight14
  • Two 12V 9A sealed lead-acid batteries included
  • Compatible with Eaton 9125 700i UPS models
  • Factory fresh batteries ensure reliable backup power
  • Kit weighs 14 units for easy handling
  • Comprehensive installation instructions provided for quick setup

Compatible UPS battery kit

This RefurbUPS kit replaces the internal batteries of an Eaton 9125 700i UPS. It contains two sealed lead-acid cells rated at 12 volts and 9 ampere-hours each. The kit is intended for administrators who need to restore runtime on a deployed unit. Installers follow the included step-by-step instructions to swap the cells without specialist tools.

Runtime limited by cell capacity

Each 12V 9A battery stores a fixed amount of energy, so the UPS can only support its load for the duration those cells allow. Adding more equipment to the UPS will shorten the available backup time proportionally. The kit does not increase the UPS power rating or extend runtime beyond the original specification. Users requiring longer outage protection must look to a higher-capacity UPS model.

Two 12V 9A cells per kit

The package supplies exactly two high-rate discharge batteries matched to the 9125 700i form factor. Both cells must be installed together to maintain the correct voltage for the UPS inverter. A single cell or a different ampere-hour rating will not operate correctly in this unit. Verify the UPS label matches the 9125 700i designation before ordering.

Highlights

  • Two 12V 9A sealed lead-acid batteries included
  • Compatible with Eaton 9125 700i UPS models
  • Factory fresh batteries ensure reliable backup power
  • Kit weighs 14 units for easy handling
  • Comprehensive installation instructions provided for quick setup

Specifications

BrandEaton 9125
SeriesEaton 9125 Batteries
TypeKit/Package
Weight14

Questions about this item

Should I choose the 12V 9A kit or a different capacity?

This kit supplies two 12V 9A high-rate SLA cells that match the original Powerware PW9125-700i cartridge; select it when your UPS label shows the same voltage and amp-hour rating.

What runtime will the 9A rating deliver in my UPS?

Runtime varies with the load attached to the 9125 700i; the 9A cells provide the factory-specified capacity for that model.

Which connector standard does the 9125 kit use?

The batteries terminate in the standard Faston tabs required by the Powerware PW9125-700i chassis.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.