Redpepper
Redpepper 1x2 HDMI Splitter 4K 30Hz 1080p 60Hz HDR10 HDCP 2.2
Splits one HDMI source to two displays at 4K 30Hz or 1080p 60Hz with HDR10 and HDCP 2.2 support
- TypeHDMI Splitter
- Changer TypeHDMI Splitter
- SpecificationsHDMI Splitter
- Output ConnectorHDMI Splitter
- FeaturesHDMI Splitter
- Duplicate one 4K source to two screens at 30 Hz
- Mirror 1080p content to dual displays at 60 Hz
- HDR10 pass-through keeps colour depth on both outputs
- HDCP 2.2 compliant for protected streaming and disc playback
- Built-in amplifier regenerates signal over long cable runs
1x2 HDMI Splitter for Dual Displays
This active HDMI splitter takes one source signal and duplicates it to two screens at the same time. It suits anyone needing identical content on a pair of TVs, monitors or projectors for gaming, presentations or home cinema. No software setup is required; the device works immediately after cables are connected.
Built-In Amplifier Extends Cable Runs
The integrated repeater regenerates and equalises the HDMI signal so picture quality holds over longer cables. HDR10 pass-through keeps the expanded colour range on both outputs, while HDCP 2.2 compliance ensures protected 4K streams play without handshake errors. 3D content is also passed through unchanged.
Check Source Resolution and HDCP Version
Verify your source can output 4K at 30 Hz or 1080p at 60 Hz, as higher refresh rates at 4K are not supported. Confirm the source and both displays handle HDCP 2.2 for protected material. The unit only duplicates the signal; it cannot show different content on each screen or switch between two sources.
Highlights
- Duplicate one 4K source to two screens at 30 Hz
- Mirror 1080p content to dual displays at 60 Hz
- HDR10 pass-through keeps colour depth on both outputs
- HDCP 2.2 compliant for protected streaming and disc playback
- Built-in amplifier regenerates signal over long cable runs
Specifications
| Brand | Unbranded |
|---|---|
| Type | HDMI Splitter |
| Changer Type | HDMI Splitter |
| Specifications | HDMI Splitter |
| Output Connector | HDMI Splitter |
| Features | HDMI Splitter |
Questions about this item
Will the HDCP 2.2 handshake need any firmware updates later?
The splitter handles HDCP 2.2 and 1.4 in hardware with no user-updatable firmware.
What resolution drops first when both 4K displays run continuously?
The 4K output is limited to 30 Hz; 1080p can reach 60 Hz on either port.
Does the unit get hot or draw extra power when amplifying signals all day?
It is an active repeater that regenerates the signal, but no power-draw or temperature figures are published.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



