We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve 1-1/4 inch pipe normally closed

Red Hat

Red Hat ASCO 8210G008 Solenoid Valve 2-Way 1-1/4 in

SKU CH-SDJP-C4EDA

A normally-closed 2-way solenoid valve with a 1-1/8 in orifice, brass body, NBR seals and 15 Cv flow rating for 110-120 V AC systems up to 150 psi

  • TypeOther
  • Two-way normally closed valve controls flow direction reliably
  • 1-1/4 inch pipe size fits standard plumbing installations
  • Brass body with NBR seals resists corrosion and wear
  • High flow Cv 15 handles demanding fluid applications
  • Watertight coil enclosure rated for 150 psi air service

Red Hat ASCO 8210G008 Solenoid Valve

This is a new ASCO 8210G008 solenoid valve designed for controlling fluid flow in plumbing or industrial systems. It operates as a two-way, normally closed valve with a 1-1/4 inch nominal pipe size and a 1-1/8 inch orifice diameter. The brass body and NBR seals suit compatible media including air and inert gas.

Upgrading from a smaller or lower-flow valve

Replace an existing valve when the application requires a Cv of 15 and a maximum operating pressure differential of 150 psi for air or inert gas. The jump is worth it when the system demands the specific 110V AC or 120V AC coil voltage and the watertight coil enclosure for the installation environment. This valve does not support fuel gas or fuel oil service.

Check pipe size, voltage, and media compatibility

Verify that the existing piping matches the 1-1/4 inch nominal size and that the control circuit supplies 110V AC or 120V AC. Confirm the fluid media is compatible with brass body construction and NBR seal material. Ensure the required operating pressure differential falls within the 150 psi maximum rating for air or inert gas. California Proposition 65 warnings apply.

Highlights

  • Two-way normally closed valve controls flow direction reliably
  • 1-1/4 inch pipe size fits standard plumbing installations
  • Brass body with NBR seals resists corrosion and wear
  • High flow Cv 15 handles demanding fluid applications
  • Watertight coil enclosure rated for 150 psi air service

Specifications

BrandASCO
TypeOther

Questions about this item

What pipe size and thread type does the 8210G008 valve need for installation?

The valve has a 1 1/4 in nominal pipe size with a 1 1/8 in orifice diameter and a brass body designed for standard NPT connections.

How do I wire the 110V AC or 120V AC coil correctly on this normally closed valve?

Connect the two coil leads to the 110V AC or 120V AC supply; the watertight enclosure requires a sealed conduit fitting to maintain its rating.

When should I replace the NBR seals in this high flow solenoid valve?

Inspect the NBR seals annually and replace them if you see swelling, cracking or leakage, especially after exposure to air or inert gas at up to 150 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.