We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum solenoid valve trap with brass fittings and electrical coil

Red Hat

Red Hat 8353J039 120V AC Aluminum Solenoid Valve Trap

SKU CH-3FV0-VRRQM MPN 8353J039

A 120V AC aluminum solenoid valve for dust-collector drains, normally closed with a 2 in orifice and 53 Cv flow rating at up to 125 psi air pressure

  • TypeDrain Components
  • MaterialHAWA
  • Normally closed design prevents unwanted flow when de-energised
  • Aluminium body resists corrosion in compressed-air systems
  • Cv 53 delivers high flow capacity for dust collectors
  • 120 V AC coil suits standard industrial control circuits
  • 125 psi maximum pressure rating handles demanding pneumatic applications

Industrial Dust Collector Valve

The Red Hat 8353J039 is a normally closed 2-way solenoid valve built for dust collector systems. It uses an aluminum body with NBR seals and a 1 1/2 inch nominal pipe size. The 2 inch orifice supports a Cv of 53 for high flow capacity. It operates on 110V AC or 120V AC power.

Thermals and Power Draw

The aluminum construction dissipates heat during extended duty cycles in compressed air service. Rated for a maximum operating pressure differential of 125 psi with air or inert gas. The solenoid coil draws standard AC current for the rated voltage without excessive heating. No fuel gas or fuel oil service ratings apply to this model.

Build Integration

This valve requires a 1 1/2 inch pipe connection and 110V or 120V AC supply wired for normally closed operation. The NBR seals suit air and inert gas lines but are not rated for fuel media. It frees up system design by providing high Cv flow in a compact aluminum body for dust collector drainage.

Highlights

  • Normally closed design prevents unwanted flow when de-energised
  • Aluminium body resists corrosion in compressed-air systems
  • Cv 53 delivers high flow capacity for dust collectors
  • 120 V AC coil suits standard industrial control circuits
  • 125 psi maximum pressure rating handles demanding pneumatic applications

Specifications

TypeDrain Components
MaterialHAWA
BrandRed Hat
Model8353J039

Questions about this item

How do I install the Red Hat 8353J039 solenoid valve and which pipe orientation step is often missed?

Mount the valve with the arrow on the aluminum body pointing in the flow direction; use 1 1/2 in pipe threads and apply thread sealant only on male threads, not inside the 2 in orifice.

What maintenance will the NBR seals and 53 Cv flow path need over time?

Inspect the NBR seals annually for swelling or cracking; clean the 2 in orifice if pressure drop exceeds normal, and replace the coil if 120V AC actuation becomes sluggish.

At what pressure limit does the 125 psi maximum differential become the first constraint during continuous air service?

The 125 psi air/inert gas differential is the hard ceiling; sustained operation at or above this limit will prevent the normally closed valve from opening reliably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.