We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 3-way solenoid valve 1/4 inch pipe normally closed 110/120V AC

Red Hat

Red Hat 8320G202 3-Way Solenoid Valve 1/4 in 110/120V AC

SKU CH-41NW-DQW6X

A 3-way direct-mount solenoid valve with a 1/4 in port, 3/32 in orifice, stainless steel body, NBR seals, 0.12 Cv and 150 psi max air pressure, operating on 110/120V AC

  • TypeOther
  • 3-way design directs flow in two positions
  • Normally closed operation holds pressure until energised
  • 1/4 in NPT port fits standard piping
  • Stainless steel body resists corrosion in wet environments
  • 150 psi max air rating covers typical pneumatic systems

ASCO EF8320G202 3-Way Valve

The ASCO EF8320G202 is a direct-mount, three-way solenoid valve built for air or inert-gas circuits. Its stainless-steel body and NBR seals suit industrial machinery and process-control panels that require a normally closed, two-position action. Buyers needing fuel-gas or fuel-oil service should look elsewhere, as those media are not rated for this model.

1/4 in Pipe with 3/32 in Orifice

The quarter-inch pipe connection and 3/32 inch orifice fix the flow path at a Cv of 0.12, so the valve replaces only components with the same port size and flow coefficient. No adapters or alternate coils are mentioned, so installers must match the existing piping and voltage exactly.

0.12 Cv at 150 psi Air

At 0.12 Cv the valve comfortably handles small-bore pneumatic actuators, pilot circuits and instrumentation branches up to 150 psi differential. It runs out of capacity on higher-flow mains, larger cylinders or any fuel-gas and fuel-oil lines where the pressure ratings are not applicable.

Highlights

  • 3-way design directs flow in two positions
  • Normally closed operation holds pressure until energised
  • 1/4 in NPT port fits standard piping
  • Stainless steel body resists corrosion in wet environments
  • 150 psi max air rating covers typical pneumatic systems

Specifications

BrandASCO
TypeOther

Questions about this item

How often will the NBR seals in this 3-way solenoid valve need replacement?

NBR seals typically last several years with air or inert gas at up to 150 psi; inspect annually and replace if leakage appears.

What pressure limit is reached first during continuous operation?

The maximum operating pressure differential for air or inert gas is 150 psi; exceeding this will cause the valve to fail to shift.

How much heat does the coil generate when the valve runs all day on 120 V AC?

The coil draws low AC power and stays warm to the touch; surface temperature remains well below levels that would degrade the NBR seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.