We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two spools of 22 AWG silicone speaker wire, red and black, 25 ft each, tinned copper strands, flexible rubber insulation

RCA SW22G60008F25C2-G 22 AWG Silicone Speaker Wire 50 ft

SKU CH-PXH2-YNVEQ

Two-colour 22 AWG silicone-insulated speaker wire on a 50 ft spool with tinned copper conductors for corrosion resistance and easy soldering

  • ColorBlack
  • Length50 ft.
  • Connector Number2
  • Specifications22 gauge silicone wire each color 25ft, BNTECHGO, 300.0 inch
  • Wire Gauge14 AWG
  • ConductorCopper Conductor
  • Ultra-flexible silicone insulation stays supple from -60 °C to 200 °C
  • Tinned 60-strand copper core resists corrosion and simplifies soldering
  • Red and black jackets give instant polarity identification
  • 50 ft total length supplied as two 25 ft spools
  • Rated for 600 volts with 1.7 mm outside diameter

RCA 22 AWG Silicone Speaker Wire

This 50‑foot spool supplies 22 AWG stranded tinned‑copper conductors with flexible silicone insulation for audio and low‑voltage wiring. It suits hobbyists, installers and DIY builders who need pliable, colour‑coded leads for speakers, models, appliances or instrument projects.

Replaces stiff PVC‑jacketed hook‑up wire

The upgrade is worthwhile when you need tighter bends, resistance from −60 °C to 200 °C, or easier soldering thanks to the tinned 60‑strand core. It also helps where long runs demand low impedance and the 600‑volt rating adds a safety margin.

Verify gauge, length and voltage fit your circuit

Confirm that 22 AWG meets the current draw of your load and that 25‑foot per colour segments reach your connection points. Ensure the 1.7 mm outer diameter clears any conduit or terminal blocks you plan to use.

Highlights

  • Ultra-flexible silicone insulation stays supple from -60 °C to 200 °C
  • Tinned 60-strand copper core resists corrosion and simplifies soldering
  • Red and black jackets give instant polarity identification
  • 50 ft total length supplied as two 25 ft spools
  • Rated for 600 volts with 1.7 mm outside diameter

Specifications

BrandRCA
ModelSW22G60008F25C2-G
ColorBlack
Length50 ft.
Connector Number2
Specifications22 gauge silicone wire each color 25ft, BNTECHGO, 300.0 inches, inches, 22, 22 gauge silicone wire red and black, 60, Silicone, 1, SW22G60008F25C2-G, 0.12 kilograms
Wire Gauge14 AWG
ConductorCopper Conductor
Features22 gauge silicone wire each color 25ft, 22, Silicone, 22 gauge silicone wire red and black, 1, 60, BNTECHGO

Questions about this item

What outside diameter does the 22 AWG silicone wire have for tight routing?

The insulation measures 1.7 mm in diameter with a tolerance of ±0.1 mm, so it fits through small grommets and tight chassis openings.

How do you strip and solder the 60-strand tinned copper without damaging the fine strands?

Use a precision stripper set for 22 AWG, remove only 3–4 mm of silicone, then tin the exposed strands quickly; the pre-tinned copper wets instantly so minimal heat is needed.

When should the silicone insulation be inspected or the wire replaced in a high-vibration install?

Check for cracks or abrasion after the first 50 hours of vibration and then annually; silicone resists -60 °C to 200 °C but physical wear from rubbing eventually requires replacement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.