We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of eight-colour 30 AWG solid-core tinned copper wire on PVC insulation

RCA 8-Color Electronic Wire 30 AWG Solid Core 250m/820ft Tinned Copper

SKU CH-TV9C-3AKT9

Eight-color 30 AWG solid-core tinned copper wire on a 250 m spool for PCB jumpers and ESD equipment wiring

  • ColorBlack
  • Length50 ft.
  • Connector Number2
  • SpecificationsJESSINIE, millimeters, 30, Multicolor, Single Strand, 1, DM-
  • Wire Gauge14 AWG
  • Features30, Multicolor, 1, Single Strand, JESSINIE
  • Eight colours simplify signal tracing in dense wiring
  • 30 AWG solid tinned copper holds shape for clean PCB jumpers
  • 56 mm outer diameter fits tight breadboard spacing
  • PVC insulation rated to 105 °C withstands soldering heat
  • 250 m total length supplies long projects without joins

8-Color 30 AWG Wire for PCB Work

This RCA wrapping wire is a single-core solid conductor made from tinned copper with PVC insulation. It ships as eight distinct colours totalling 250 m (820 ft) for organised signal routing. The 30 AWG gauge suits low-voltage prototyping, ESD equipment wiring and general circuit-board assembly.

Check Soldering Heat and Current Needs

The insulation withstands 105 °C, so verify your iron temperature stays within that limit during joints. The conductor cross-section is 0.2 mm² with a 0.203 mm copper diameter, so confirm the current demand of your signals fits this small gauge. Ensure solid-core wire matches your board’s through-hole or wrap-post style.

Fits Tight Board Layouts and Colour-Coded Looms

At 0.56 mm overall diameter the wire threads dense protoboards and fine-pitch headers without crowding adjacent pads. Eight colours free you from tracing nets by eye and speed up debug on multi-signal runs. Solid core holds shaped bends for neat, repeatable looms inside enclosures.

Highlights

  • Eight colours simplify signal tracing in dense wiring
  • 30 AWG solid tinned copper holds shape for clean PCB jumpers
  • 56 mm outer diameter fits tight breadboard spacing
  • PVC insulation rated to 105 °C withstands soldering heat
  • 250 m total length supplies long projects without joins

Specifications

BrandRCA
ModelP/N PCB
ColorBlack
Length50 ft.
Connector Number2
SpecificationsJESSINIE, millimeters, 30, Multicolor, Single Strand, 1, DM-30-1000, P/N PCB
Wire Gauge14 AWG
Features30, Multicolor, 1, Single Strand, JESSINIE

Questions about this item

What colours and total length come in the box, and is anything else needed to start using it?

The reel contains eight colours — black plus seven others — totalling 250 m (820 ft) of 30 AWG solid-core tinned copper wire with PVC insulation rated to 105 °C. No extra items are required; cut and strip the lengths you need.

The listing mentions both 30 AWG and 14 AWG — which gauge is actually supplied?

The product is 30 AWG wire (0.203 mm copper core, 0.2 mm² cross-section, 0.56 mm overall diameter). The 14 AWG figure appears in error and does not apply to this reel.

Will the 105 °C rating survive normal soldering on a PCB without melting the insulation?

Yes. The PVC jacket is rated to 105 °C, well above typical lead-free soldering temperatures, so brief iron contact during PCB jumper or wrapping work will not damage the insulation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.