We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty-four blue Cat6 patch cables, one foot each, gold-plated RJ45 connectors, snagless boots

Rapink Cat6 1ft 24-pack Ethernet cables blue

SKU CH-DHXG-WXZH3

A 24-pack of 1-foot Cat6 patch cables with gold-plated RJ45 connectors rated for 10Gbps at 550MHz

  • TypeEthernet
  • Cat6
  • Connector ARJ45
  • ColorBlue
  • Shielded550MHZ
  • FeaturesHigh Speed, 10gigabits/s, 550MHZ, POE/POE+/POE++,
  • Ready-to-use 24-pack saves hours of cutting and crimping
  • Gold-plated RJ45 contacts support 10 Gbit/s at 550 MHz
  • 1 ft length keeps patch-panel-to-switch runs tidy
  • Snagless molded strain relief protects the clip on every unplug
  • Meets TIA/EIA 568-C.2 Category 6 performance standard

24-pack Cat6 patch cables

This 24-pack of Rapink Cat6 Ethernet cables provides 1-foot patch cords for high-density connections between patch panels and switches. Each cable uses 26AWG stranded pure copper conductors with gold-plated 8P8C contacts. The blue jacket allows quick visual identification in crowded racks. Buyers who need longer runs or individual cables will not be served by this pack.

Sustained 10-gigabit throughput

The cables are rated for 550MHz bandwidth and support 10-gigabit speeds across the full length. Gold-plated pins maintain consistent contact resistance during continuous data transfer. PoE, PoE+ and PoE++ power delivery remains stable under load. The stranded construction preserves signal integrity when cables are routed through tight cable-management channels.

Thermals noise and power draw

Passive copper cables generate no heat and produce no audible noise during operation. Power consumption is limited to the negligible resistance of the 26AWG conductors. Fully moulded strain relief and snagless clip protectors prevent connector damage during repeated insertion and removal. The design meets or exceeds the TIA/EIA 568-C.2 Category 6 performance standard.

Highlights

  • Ready-to-use 24-pack saves hours of cutting and crimping
  • Gold-plated RJ45 contacts support 10 Gbit/s at 550 MHz
  • 1 ft length keeps patch-panel-to-switch runs tidy
  • Snagless molded strain relief protects the clip on every unplug
  • Meets TIA/EIA 568-C.2 Category 6 performance standard

Specifications

BrandRapink
TypeEthernet
Cat6
Connector ARJ45
ColorBlue
Shielded550MHZ
FeaturesHigh Speed, 10gigabits/s, 550MHZ, POE/POE+/POE++,

Questions about this item

How much heat or power draw should I expect from the 24-pack of 1 ft Cat6 cables running all day?

The cables are passive copper with 26 AWG conductors and gold-plated RJ45 contacts, so they generate no measurable heat and draw no power themselves; only the connected PoE devices and switch ports consume energy.

What equipment must I already have for these 1 ft blue Cat6 cables to work in my rack?

You need a patch panel and a switch (or router) with RJ45 ports; the 1 ft length is designed for patch-panel-to-switch links, so both ends must terminate in standard 8P8C jacks.

Will these Cat6 550 MHz cables work reliably with my older Cat5e patch panel and 1 GbE switch?

Yes, the Cat6 cables are backward compatible — they meet the TIA/EIA 568-C.2 standard and will negotiate 1 GbE speeds on legacy gear while still supporting PoE/PoE+/PoE++ power delivery.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.