Rapink 24PC6AB 24-pack Cat6a .5ft Blue 28AWG 10G 550MHz Snagless Slim
A 24-pack of .5ft Cat6a cables with 28AWG slim design for 10G 550MHz patch-panel-to-switch links
- TypeEthernet
- Cat6A
- Connector ARJ45
- ColorBlue
- FeaturesHigh Speed, 10gigabits/s, , ,
- 24-pack supplies enough short cables for dense patch-panel-to-switch runs
- 28 AWG slim profile is at least 50% smaller than standard cables for easier routing
- 5 ft length reduces rack clutter and improves airflow in high-density installations
- Snagless RJ45 clips allow clear port visibility and quick release during patching
- Gold-plated contacts support 10 Gbps at 550 MHz per TIA-568.2-D with PoE compatibility
24-pack Cat6a patch cables for dense racks
This 24-pack of Cat6a patch cables is built for technicians wiring patch panels to switches in high-density racks. Each cable measures .5 foot and uses 28 AWG conductors rated for 10 gigabit speeds at 550 MHz. The blue jackets help colour-code links in crowded cabinets.
Slim 28 AWG build eases routing and airflow
At 28 AWG the cables are roughly 50 percent thinner than standard 24 AWG patch cords, so they slide through cable-management fingers and tight bend radii without forcing. The reduced bulk leaves more open space in the rack, improving airflow and cooling around active equipment. Gold-plated RJ45 contacts resist corrosion for reliable 10G connectivity.
Snagless clips and POE support speed installs
Clear snagless boots protect the locking tabs and make port LEDs visible, letting installers confirm link status at a glance. The cables comply with the TIA-568.2-D standard and carry Power over Ethernet, so access points or cameras can be powered through the same run. Bundled as a 24-pack, they keep spares on hand for rapid moves, adds and changes.
Highlights
- 24-pack supplies enough short cables for dense patch-panel-to-switch runs
- 28 AWG slim profile is at least 50% smaller than standard cables for easier routing
- 5 ft length reduces rack clutter and improves airflow in high-density installations
- Snagless RJ45 clips allow clear port visibility and quick release during patching
- Gold-plated contacts support 10 Gbps at 550 MHz per TIA-568.2-D with PoE compatibility
Specifications
| Brand | Rapink |
|---|---|
| Model | 24PC6AB |
| Type | Ethernet |
| Cat | 6A |
| Connector A | RJ45 |
| Color | Blue |
| Features | High Speed, 10gigabits/s, , , |
Questions about this item
What speed does the Cat6a 550 MHz rating actually support?
The cables are rated for 10 Gbps at 550 MHz, matching the TIA-568.2-D standard for 10G applications.
Will the 28 AWG slim cables fit a standard 24-port patch panel?
Yes, the 28 AWG conductors use standard RJ45 connectors that fit any 12, 24 or 48 port patch panel.
How do I install the snagless clips without breaking the tabs?
Press the clear snagless clip down while inserting the RJ45 plug; the clip protects the tab and releases easily when you squeeze it.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



