We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black steel cantilever shelves with vented surfaces and mounting hardware

RackPath 2U Cantilever Rack Shelf 14in Deep 55lbs 2 Pack

SKU CH-HGVC-GB772

Two-pack of 2U cantilever shelves, 14 inches deep, each rated for 55 lbs in standard 19-inch racks

  • TypeRack Shelf
  • ColorBlack
  • MaterialSteel
  • Weight Capacity55 pounds
  • Specification14 L x 19 W x 3.5 H inches, 14-Inches Deep, Alloy Steel, 55
  • FeaturesHeavy Duty, Powder Coated, Rack Mount, 55 pounds, Do not exc
  • Holds routers, modems, UPS units and monitors in standard 19-inch racks
  • Vented surface improves airflow and helps prevent equipment overheating
  • Each shelf supports up to 55 lbs using 1.5 mm cold-rolled steel
  • 2U height frees vertical space while giving 17.5 by 14 inch usable area
  • Two shelves ship with M6 screws, washers and cage nuts for quick installation

2U Cantilever Shelf Pair

This two-pack provides two 2U cantilever shelves built from 1.5 mm cold-rolled steel with a black powder-coated finish. Each shelf mounts to standard 19-inch EIA/ECA-310 racks and cabinets using the included M6 screws, cage nuts and plastic washers. The design targets installers who need quick, tool-light mounting for network gear, AV components or small UPS units.

14-Inch Depth and 55 lb Capacity

Usable surface measures 17.5 inches wide by 14 inches deep, giving room for routers, modems or monitors while the vented deck promotes airflow. The rated limit is 55 pounds per shelf; exceeding it risks deformation or mounting failure. The cantilever style leaves the rear open for cable routing but offers no rear support, so deep or rear-heavy chassis may need a different shelf type.

Replaces Fixed or Single Shelves

Swapping a fixed-depth shelf for this cantilever pair frees rear clearance and simplifies cable management in 19-inch racks. The upgrade makes sense when you need two mounting locations with open backs and can stay within the 55-pound limit. Buyers who need rear-support rails, deeper decks or higher load ratings should look elsewhere.

Highlights

  • Holds routers, modems, UPS units and monitors in standard 19-inch racks
  • Vented surface improves airflow and helps prevent equipment overheating
  • Each shelf supports up to 55 lbs using 1.5 mm cold-rolled steel
  • 2U height frees vertical space while giving 17.5 by 14 inch usable area
  • Two shelves ship with M6 screws, washers and cage nuts for quick installation

Specifications

BrandRackPath
TypeRack Shelf
ColorBlack
MaterialSteel
Weight Capacity55 pounds
Specification14 L x 19 W x 3.5 H inches, 14-Inches Deep, Alloy Steel, 55 pounds, Shelves, Screws, Plastic Washers, Cage Nuts, Heavy Duty, Powder Coated, Do not exceed 55lbs (25kg) weight limit. Ensure proper ventilation and installation in standard 19” racks and cabinets to prevent equipment overheating or damage.
FeaturesHeavy Duty, Powder Coated, Rack Mount, 55 pounds, Do not exceed 55lbs (25kg) weight limit. Ensure proper ventilation and installation in standard 19” racks and cabinets to prevent equipment overheating or damage., Shelves, Screws, Plastic Washers, Cage Nuts
Industry Standard24102004
Included AccessoryShelves, Screws, Plastic Washers, Cage Nuts
Optional AccessoryShelves, Screws, Plastic Washers, Cage Nuts
Unit Dimension14-Inches Deep
Unit Weight5.14 pounds
Shipping Dimension11.43 cm x 40.64 cm x 51.435 cm
Shipping Weight5.307 kilograms

Questions about this item

Will the 14in deep cantilever shelf clear the rear rails of my existing 19in rack?

The shelf mounts to the front rails only and extends 14 inches forward, so it clears rear rails entirely.

How do I confirm the shelf is seated correctly after mounting?

All four cage nuts should be fully engaged in the front rails, the shelf sits level at 3.5in height, and the vented surface aligns with the 17.5in usable width.

Does the 2-pack include every fastener needed for two shelves?

Yes — each pack supplies two shelves plus 12 M6 screws, 12 plastic washers and 12 cage nuts, enough for both units.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.