We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue round Cat 7 Ethernet cable with RJ45 connectors, 3 ft length

QualGear

QualGear QG-CAT7R-1FT-BLK Cat 7 RJ45 Ethernet Cable 3 ft Blue

SKU CH-73YR-A3PW5

Cat 7 patch cable with triple shielding and 600 MHz bandwidth for 10 Gbps Ethernet runs up to 100 m

  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorBlue
  • ShieldedYes
  • Supports 10 Gbps Ethernet for rapid data transfer
  • 600 MHz bandwidth handles demanding network applications
  • Triple-shielded design with 99.99% oxygen-free copper reduces interference
  • Gold-plated RJ45 connectors ensure reliable signal integrity
  • Round 3 ft blue cable routes easily in tight spaces

QualGear Cat 7 RJ45 Ethernet Cable 3 ft Blue

This three-foot Cat 7 patch cable uses RJ45 connectors on both ends and is rated for 10 Gbps data transfer at up to 600 MHz. It suits home or office networks that need reliable Gigabit and 10-Gigabit links over short runs. The round blue jacket and triple-shielded construction help reduce interference in dense cabling environments.

Check your switch and device ports before ordering

Ensure both ends of the link have RJ45 ports capable of the speed you intend to run; older 100 Mbps ports will limit throughput. Verify that the 3 ft length reaches between your patch panel, router, switch or wall jack and the target device without strain. Confirm that your existing cabling infrastructure uses compatible shielding and category ratings for consistent performance.

Replaces Cat 5e or Cat 6 patch cords when 10 Gbps

The jump is worthwhile when upgrading a bottleneck link between a 10-Gigabit switch and a workstation, NAS or server that supports the higher rate. It also benefits installations where alien crosstalk or EMI from power cables degrades lower-category cables. If your network operates at 1 Gbps or below and runs are trouble-free, the existing cables remain adequate.

Highlights

  • Supports 10 Gbps Ethernet for rapid data transfer
  • 600 MHz bandwidth handles demanding network applications
  • Triple-shielded design with 99.99% oxygen-free copper reduces interference
  • Gold-plated RJ45 connectors ensure reliable signal integrity
  • Round 3 ft blue cable routes easily in tight spaces

Specifications

BrandQualGear
ModelQG-CAT7R-1FT-BLK
Cat7
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorBlue
ShieldedYes
FeaturesData Transfer
High Speed
Low Voltage

Questions about this item

What comes with the QualGear QG-CAT7R-1FT-BLK cable and do I need to buy connectors separately?

The cable is supplied with RJ45 connectors already fitted on both ends, so no additional connectors are required for a standard Ethernet link.

Which length should I choose from the 1 ft, 3 ft, 6 ft, 10 ft, 15 ft, 20 ft, 25 ft, 50 ft and 100 ft options?

Pick the shortest length that reaches between your devices with a little slack; the 3 ft version suits close equipment while 50 ft or 100 ft cover longer runs up to the 100 m Cat 7 limit.

What does the 600 MHz / 10 Gbps rating mean when the cable is installed in my network?

It certifies the cable can carry 10 Gbps Ethernet signals at up to 600 MHz bandwidth over the full 100 m channel distance when paired with compatible 10 GbE hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.