We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White flat Cat 7 Ethernet cable with RJ45 connectors, 20 ft length

QualGear

QualGear Cat 7 Ethernet Patch Cable 20 ft White Flat

SKU CH-MPN4-NZ3KC

A flat Cat 7 Ethernet patch cable supporting 10 Gbps at 600 MHz with triple shielding, gold-plated RJ45 connectors and 99.99% oxygen-free copper for easy under-carpet runs

  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length20 ft.
  • ColorWhite
  • ShieldedYes
  • 10 Gbps data transfer over 100 m runs
  • 600 MHz bandwidth for demanding network loads
  • 99 % oxygen-free copper with gold-plated RJ45 contacts
  • Flat 20 ft profile installs under carpets and along baseboards
  • Triple-shielded construction resists interference for reliable links

20 ft Flat Cat 7 Ethernet Cable

This QualGear Category 7 patch cable uses RJ45 connectors at both ends and a flat white jacket designed to run under carpets or along baseboards without bulges. It is built with 99.99 % oxygen-free copper conductors and gold-plated contacts for reliable signal integrity. The construction is triple-shielded to reduce interference in busy network environments.

Home and office runs needing a low-profile cable

The flat profile suits installations where a round cable would be visible or difficult to route, such as along skirting boards, through door frames or beneath flooring. It supports data transfer for gigabit and 10-gigabit Ethernet links. Builders who need in-wall rated jacketing or plenum-rated fire performance should look at cables specifically marked for those requirements.

10 Gbps bandwidth with 600 MHz headroom

The cable carries 10 Gbps Ethernet signals over the full 20 ft length and is rated for up to 100 m maximum channel distance. The 600 MHz transmission frequency provides headroom for high-bandwidth applications such as large file transfers, video streaming and low-latency gaming. Runs longer than 100 m will exceed the specification and require a switch or repeater.

Highlights

  • 10 Gbps data transfer over 100 m runs
  • 600 MHz bandwidth for demanding network loads
  • 99 % oxygen-free copper with gold-plated RJ45 contacts
  • Flat 20 ft profile installs under carpets and along baseboards
  • Triple-shielded construction resists interference for reliable links

Specifications

BrandQualGear
ModelQG-CAT7R-1FT-BLK
Cat7
Connector ARJ45
Connector BRJ45
Length20 ft.
ColorWhite
ShieldedYes
FeaturesData Transfer
High Speed
Low Voltage

Questions about this item

What network ports must my router and computer have for this 20 ft Cat 7 flat cable to deliver its 10 Gbps rating?

Both ends need RJ45 ports that support 10 Gigabit Ethernet; the cable itself is terminated with standard RJ45 connectors on each side.

Will this 600 MHz shielded Cat 7 cable work reliably if I keep my older Cat 5e patch panel and wall jacks in the same run?

Yes, the cable is backward compatible and will operate at the highest speed the oldest component in the link supports, typically 1 Gbps on Cat 5e hardware.

How can I verify the flat white cable is performing at its specified 600 MHz bandwidth after I route it under the carpet?

Run a cable certifier or the link-speed test in your router’s admin page; a healthy Cat 7 link should negotiate 10 Gbps and show clean signal-to-noise margins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.