We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PCI Express 36PIN 1X extender with 15cm flat flexible cable and gold-plated connectors

Qin Bo Electronics

Qin Bo Electronics PCI Express 36PIN 1X Extender Cable White 15cm FFC

SKU CH-E40Z-REMAV

A 15 cm flat-flexible extender with a gold-plated 36-pin PCIe x1 connector for board-level debug and test work

  • TypeExtension Cables
  • ColorWhite
  • SpecificationsPCI-E 36PIN Extender Cable
  • FeaturesWith Gold-Plated Connector,36PIN
  • 15 cm FFC cable gives flexible routing inside tight cases
  • 36-pin PCIe x1 edge-free connector accepts x4, x8 and x16 cards
  • gold-plated contacts reduce signal loss during debug and test
  • weighs 16 g for minimal load on motherboard slot
  • white finish matches light-themed builds

PCI Express 36PIN 1X Extender Cable

The Qin Bo Electronics PCI Express 36PIN 1X Extender Cable is a debug and test tool designed to minimise signal degradation. It uses a flat flexible cable for adaptable routing inside a chassis. The gold-plated connectors ensure reliable contact during repeated insertion cycles. Engineers and technicians use it to protect motherboard slots during hardware validation.

Thermals noise and power draw

As a passive cable assembly the product generates no heat and produces no audible noise during operation. It draws no power of its own and simply passes signals between the host and the add-in card. The 15 cm flat flexible cable keeps the signal path short to preserve integrity. Normal use adds no thermal load to the system.

36PIN gold-plated connector

The single specification that decides suitability is the 36PIN gold-plated connector matching a PCI Express x1 edge connector. Cards requiring x4 x8 or x16 mechanical slots are also physically compatible because the x1 connector is edge-free. Buyers who need a different pin count or a right-angle bracket cannot use this part.

Highlights

  • 15 cm FFC cable gives flexible routing inside tight cases
  • 36-pin PCIe x1 edge-free connector accepts x4, x8 and x16 cards
  • gold-plated contacts reduce signal loss during debug and test
  • weighs 16 g for minimal load on motherboard slot
  • white finish matches light-themed builds

Specifications

BrandQin Bo Electronics
ModelPCI Express Cable
TypeExtension Cables
ColorWhite
SpecificationsPCI-E 36PIN Extender Cable
FeaturesWith Gold-Plated Connector,36PIN

Questions about this item

How do I install the 36PIN PCIe x1 extender with the 15cm FFC cable and avoid the common mistake?

Align the gold-plated 36PIN connector with the motherboard x1 slot, then attach the FFC cable to the riser board; the step often missed is fully seating the FFC into its latch before powering on.

What maintenance or replacement will the white 36PIN extender and FFC cable need later?

Inspect the gold-plated contacts and FFC crease points periodically; replace the 15cm FFC if the flexible cable shows cracking or the connector pins become bent.

What limit appears first when the 36PIN extender runs under sustained load?

Signal integrity over the 15cm FFC is the first constraint; the extender is designed to minimise degradation, but extended high-speed use will hit the cable’s length-related timing margin first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.