We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Qin Bo Electronics

Qin Bo Electronics 10802017 RP-SMA Extension Cable 6m

SKU CH-CE48-F8D7W

A shielded 6 m RP-SMA extension cable with gold-plated copper connectors for positioning Wi-Fi antennas

  • TypeExtension Cable
  • CatMaterial of connector: Gold-plated copper
  • Lengthabout 6 Meter
  • ColorBlack
  • ShieldedYes
  • FeaturesConnector:RP-SMA female to RP-SMA male
  • 6 m length lets you position antennas for best signal
  • RP-SMA female-to-male connectors fit routers and wireless cards directly
  • Gold-plated copper contacts resist corrosion for reliable throughput
  • Shielded construction reduces interference on the 50 Ω line
  • Light 78 g cable is easy to route and secure

Extension cable for RP-SMA antennas

The Qin Bo Electronics 10802017 is a 6 metre RP-SMA extension cable designed to relocate Wi-Fi antennas on wireless cards, routers or bridges. It connects an RP-SMA female port to an RP-SMA male plug, allowing the antenna to be positioned for better signal reception. The cable suits installers who need to move an external antenna away from the host device.

Gold-plated connectors and shielding

Gold-plated copper connectors provide a 50 ohm output impedance with a VSWR of 1.2 dB, preserving signal integrity across the full length. The shielded black jacket protects the centre conductor from electromagnetic interference in typical indoor environments. These features maintain gain performance for any compatible high-gain antenna attached to the far end.

Simple screw-on installation

The cable weighs 78 grams and terminates in standard RP-SMA threads, so it screws onto the antenna and device without tools. Installers must verify that both ends use reverse-polarity SMA, because standard SMA connectors look similar but will not mate. Routing the six-metre run through tight conduit or sharp bends may strain the connector joints.

Highlights

  • 6 m length lets you position antennas for best signal
  • RP-SMA female-to-male connectors fit routers and wireless cards directly
  • Gold-plated copper contacts resist corrosion for reliable throughput
  • Shielded construction reduces interference on the 50 Ω line
  • Light 78 g cable is easy to route and secure

Specifications

BrandQin Bo Electronics
Model10802017
TypeExtension Cable
CatMaterial of connector: Gold-plated copper
Lengthabout 6 Meter
ColorBlack
ShieldedYes
FeaturesConnector:RP-SMA female to RP-SMA male

Questions about this item

Will the RP-SMA connectors need periodic re-tightening or replacement after long-term installation?

The gold-plated copper connectors resist corrosion and maintain conductivity, so routine re-tightening is not required unless the cable is physically disturbed.

What is the maximum signal loss I should expect when running this 6 m extension at 50 Ω impedance?

With a VSWR of 1.2 dB the cable adds minimal reflection loss; total attenuation is dominated by the 6 m length at the operating frequency.

Does the shielded jacket and 78 g weight indicate any thermal or power-handling limits for continuous router use?

The cable is passive and carries only RF signal, so it generates no heat and has no power-draw limit; the shield simply prevents external interference.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.