We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and red shielded SATA 22pin to 7pin data plus 4pin IDE power cable, 40cm

QAREQU

QAREQU SATA 22pin to 7pin Data + 4pin IDE Power Cable 40cm

SKU CH-47CP-XJKPN

Connects a 22-pin SATA drive to motherboard data and 4-pin IDE power in one 40 cm shielded cable supporting 3.0 Gbps

  • ColorBlack & Red
  • Connect Serial ATA devices with one cable combining data and power
  • 22pin SATA to 7pin data plus 4pin IDE power connector
  • Data transfer rates up to 3.0 Gbps supported
  • Shielded cable protects against EMI and RFI interference
  • 40cm length and 45g weight for compact internal routing

Single-cable SATA data and IDE power adapter

This 22-pin SATA cable splits into a 7-pin data connector and a 4-pin IDE power plug so a desktop hard disk or optical drive connects to the motherboard and power supply with one lead. It is built for builders who need to add a SATA drive to a system that still uses Molex-style power headers. It does not suit IDE hard disks or IDE optical drives, nor drives that require a 15-pin SATA power connector.

Shielded construction for stable 3.0 Gbps transfers

The cable is shielded against EMI and RFI to maintain data rates up to 3.0 Gbps across its 40 cm length. At 45 g it adds negligible weight inside the case and the black-and-red jacket helps identify the data and power branches during installation. No active cooling or additional power circuitry is involved.

Bulk pack includes only the combo cable

The package contains a single SATA combo cable with no drive, mounting screws, adapters or software. The drive shown in product photos is for demonstration only. Buyers needing a 15-pin SATA power connection, right-angle connectors or longer reach must source a different cable.

Highlights

  • Connect Serial ATA devices with one cable combining data and power
  • 22pin SATA to 7pin data plus 4pin IDE power connector
  • Data transfer rates up to 3.0 Gbps supported
  • Shielded cable protects against EMI and RFI interference
  • 40cm length and 45g weight for compact internal routing

Specifications

ColorBlack & Red

Questions about this item

How do I connect the 22pin SATA drive using this 40cm cable?

Plug the 22pin end into the drive, the 7pin data connector into the motherboard SATA port, and the 4pin IDE power connector into a Molex lead from the power supply; the cable carries both signals in one run.

Will the shielding or connectors degrade and need replacement?

The shielded 45g cable has no moving parts or active components, so it does not wear out; replace it only if the 7pin data plug, 4pin power plug, or 22pin drive connector becomes physically damaged.

What throughput ceiling appears first during long transfers?

The 3.0 Gbps SATA data link sets the maximum sustained rate, so continuous reads or writes cannot exceed that interface limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.