ProX
ProX XC-SQ100 100' 12AWG SpeakOn to 1/4" TS-M speaker wire
A 100‑foot 12AWG speaker cable with SpeakOn to 1/4" TS‑M connectors for long‑run audio connections
- Clear sound through 12 AWG oxygen-free copper conductors
- 100 foot length reaches across large stages and studios
- SpeakOn to 1/4 inch TS-M connectors fit pro audio gear
- Black PVC jacket resists wear from touring and heavy use
- Flexible design simplifies routing in live and installed systems
ProX XC-SQ100 12AWG speaker cable
The ProX XC-SQ100 is a 100-foot speaker cable built with 12AWG oxygen-free copper conductors. It connects equipment fitted with SpeakOn inputs to devices using 1/4" TS-M outputs. The cable is intended for live sound, studio and sound reinforcement work. Its black PVC jacket is designed for flexibility and low visibility on stage.
Simple SpeakOn and 1/4" TS-M connection
Installation is straightforward because both connectors are standard push-fit types. The SpeakOn end locks with a quarter-turn, while the 1/4" TS-M plug inserts directly into the jack. The main risk is forcing a connector into a mismatched socket or snagging the jacket on sharp edges during cable runs.
Verify connector types and run length
Before ordering, confirm that your source device provides a 1/4" TS-M output and your speaker or amplifier accepts a SpeakOn input. Check that a 100-foot run suits the distance between your components without excess slack. Ensure the jacket material is acceptable for the installation environment.
Highlights
- Clear sound through 12 AWG oxygen-free copper conductors
- 100 foot length reaches across large stages and studios
- SpeakOn to 1/4 inch TS-M connectors fit pro audio gear
- Black PVC jacket resists wear from touring and heavy use
- Flexible design simplifies routing in live and installed systems
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the 12AWG cable is passing signal cleanly after connecting the SpeakOn and 1/4" TS-M ends?
Play audio through the system and listen for clear, undistorted sound at both low and high volumes; the Oxygen-Free Copper conductors and 12AWG gauge are designed to minimise resistance over the full 100-foot run.
What connectors and cable are included, and is any additional hardware required?
The box contains the 100-foot 12AWG speaker cable with a SpeakOn connector on one end and a 1/4" TS-M connector on the other; no extra adapters or cables are needed for standard speaker-to-amp connections.
Which length and gauge version should I choose for a long stage run?
This model is a 100-foot, 12AWG cable — select it when you need maximum reach with low resistance for professional stage or studio speaker links.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



