We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black perforated steel rack shelf, 2U high, 18 inches deep

ProX

ProX T-RS2-18 Rack Mount Shelf 18" Deep 2U

SKU CH-5KHW-JZJET

A 2U rack shelf fitting 19" racks 18" deep, holding 60 lb with perforated airflow and regular or inverted mounting

  • Supports up to 60 lb of equipment
  • Fits standard 19" racks with 18" minimum depth
  • Regular or inverted mounting options
  • Cold-rolled steel construction for durability
  • Perforated bottom improves airflow and reduces weight

Rack shelf for 19-inch cabinets

The ProX T-RS2-18 is a 2U rack-mount shelf designed for standard 19-inch equipment racks with a minimum depth of 18 inches. It provides a compact storage platform for gear and accessories in server rooms, studios or equipment cabinets. The shelf supports both regular and inverted mounting orientations for flexible installation. Cold-rolled steel construction delivers a sturdy foundation for installed equipment.

Perforated base aids airflow and weight

A perforated bottom panel reduces the shelf's own weight while promoting air circulation around mounted devices. This passive airflow design helps prevent heat build-up inside the rack without adding active cooling components. The open structure allows convection currents to move through the shelf naturally. No fan noise or power draw is introduced by the shelf itself.

Steel frame holds 60 pounds continuously

The cold-rolled steel frame is rated to support up to 60 pounds of equipment under sustained load. This capacity remains constant during extended operation rather than only in short bursts. The shelf maintains its structural integrity without sagging when fully loaded over long periods. Inverted mounting does not alter the stated weight limit.

Highlights

  • Supports up to 60 lb of equipment
  • Fits standard 19" racks with 18" minimum depth
  • Regular or inverted mounting options
  • Cold-rolled steel construction for durability
  • Perforated bottom improves airflow and reduces weight

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the ProX T-RS2-18 shelf in a 19-inch rack and what is the common alignment mistake?

The shelf occupies 2U and fits any standard 19-inch rack with at least 18 inches of depth. It supports regular or inverted mounting. The step people get wrong is failing to align both front and rear rack rails before tightening the screws, which leaves the shelf crooked.

What maintenance or replacement will the ProX T-RS2-18 shelf need over time?

The cold-rolled steel construction and perforated bottom require no scheduled maintenance. Inspect the mounting screws periodically for loosening from vibration. Replace the shelf only if the steel bends or the perforation tears under sustained loads near the 60-pound rating.

What is the first limit that appears when the ProX T-RS2-18 shelf runs at full 60-pound capacity continuously?

The 60-pound load rating is the primary limit. Exceeding it risks permanent deflection of the cold-rolled steel deck. The perforated bottom aids airflow, but sustained maximum weight combined with poor rack ventilation can raise equipment temperatures.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.