We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black power brick with 4-pin output plug and detachable mains cord

Protek Power

Protek Power PMP150-12-HI 12V 11A 132W power adapter 4-pin plug

SKU CH-NH3X-EFVKW MPN PMP150-12-HI

Delivers 12V at 11A with 132W output and a 4-pin plug, accepting 100-240V input

  • 12 V 11 A output delivers 132 W stable power
  • Universal 100-240 V input works worldwide from 47-63 Hz
  • Four-pin plug ensures secure device connection
  • Includes power cord for immediate setup
  • Built-in protection guards against short circuit and overheating

Power adapter for 12 V equipment

The Protek Power PMP150-12-HI delivers a regulated 12 V output at 11 A for a total of 132 W. It suits devices that require a stable 12 volt supply within this current envelope.

4-pin plug and included mains cord

A four-pin connector mates with the target device while the bundled power cord connects to a 100-240 V 47-63 Hz wall outlet. The unit is tested for correct voltage, short-circuit and internal-overheating safeguards, and the housing may show minor cosmetic marks that do not affect operation.

Limits of the 132 W rating

The adapter cannot supply more than 11 A at 12 V, so equipment drawing higher peak or continuous current will exceed its capacity. It also lacks a multi-voltage output, meaning devices needing other rail voltages must use a different supply.

Highlights

  • 12 V 11 A output delivers 132 W stable power
  • Universal 100-240 V input works worldwide from 47-63 Hz
  • Four-pin plug ensures secure device connection
  • Includes power cord for immediate setup
  • Built-in protection guards against short circuit and overheating

Specifications

ModelPMP150-12-HI

Questions about this item

What input voltage range and frequency does the PMP150-12-HI accept?

The adapter accepts 100-240V AC at 47-63Hz, drawing between 1.63A and 0.7A depending on the supply voltage.

What connector does the PMP150-12-HI use to connect to the device?

It uses a 4-pin plug connector labelled Connector A4 Pin Plug in the specifications.

How is the PMP150-12-HI installed, and what step is often missed?

Connect the supplied power cord to the adapter inlet, plug the 4-pin plug firmly into the device, then switch on the mains; the step often missed is fully seating the 4-pin plug until it clicks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.