We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver-grey thermal paste in a 30 g syringe with spreader cap

Prolimatech

Prolimatech PK-2-30G thermal paste 30g

SKU CH-2FSF-9TSQP MPN PK-2-30G

A 30 g syringe of nano-aluminium thermal compound rated at 10.2 W/m-°C conductivity and 0.017 °C-in²/W impedance for easy, thin application

  • High thermal conductivity of 10.2 W/m-°C for efficient heat transfer
  • Very low thermal resistance at 0.017 °C-in2/W improves cooler performance
  • Easy application with 310000Cps viscosity enables thin, even coats
  • Electrically non-conductive and non-corrosive for safe use on components
  • Long-term stability with low dry-out extends paste lifespan

Nano-aluminium thermal compound

Prolimatech PK-2-30G is a nano-aluminium thermal compound supplied in a 30 gram syringe. It uses a blend of aluminium and zinc oxide to achieve a thermal conductivity of 10.2 W/m-°C. The paste is electrically non-conductive and non-corrosive. No burn-in time is required after application.

PC builders seeking easy application

The low viscosity of 310000Cps lets the compound spread into a very thin, even coat with minimal effort. This suits builders who want reliable heat transfer without frequent re-application. Users who require a higher conductivity rating than 10.2 W/m-°C should look at alternative formulations.

Thermal conductivity of 10.2 W/m-°C

This single figure determines whether the paste meets the thermal budget of your cooler and processor. The material's specific gravity is 3.2 g/cm³ and thermal impedance is 0.017 °C-in2/W. If your design demands a different conductivity value, this compound will not be the correct choice.

Highlights

  • High thermal conductivity of 10.2 W/m-°C for efficient heat transfer
  • Very low thermal resistance at 0.017 °C-in2/W improves cooler performance
  • Easy application with 310000Cps viscosity enables thin, even coats
  • Electrically non-conductive and non-corrosive for safe use on components
  • Long-term stability with low dry-out extends paste lifespan

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the PK-2-30G is working correctly after applying it?

Monitor CPU or GPU temperatures under load; the 10.2 W/m-°C thermal conductivity and 0.017 °C-in2/W impedance should yield lower steady-state temps versus your previous paste.

What does the 30 g syringe package include and is any extra tool required?

The box contains one 30 gram syringe and an integrated easy-to-spread applicator; no separate spreader or cleaning solvent is bundled.

Which capacity should I choose for a typical desktop CPU and GPU repaste?

The 30 gram syringe provides enough compound for multiple CPU and GPU applications, covering several builds or future reapplications.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.