We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular adapter with RJ45 and USB-C ports

PROCET PT-PGC-AF PoE to USB-C Adapter 5V 2A 1000Mbps

SKU CH-F5QG-QNTPE

Converts IEEE 802.3af PoE to USB-C with 5V 2A power and 1000Mbps Ethernet data for phones and tablets

  • Weight0.06 kilograms
  • Converts IEEE 802.3af PoE to USB-C 5V 2A power and gigabit data
  • Plug-and-play setup delivers instant 1000 Mbps wired Ethernet without configuration
  • Single adapter replaces separate power supply and network cable for phones and tablets
  • Works with Windows Android iOS devices for universal mobile connectivity
  • Lightweight 0.06 kg design fits in a pocket for travel and remote work

PoE-to-USB-C Power and Data Adapter

The PROCET PT-PGC-AF converts IEEE802.3af Power over Ethernet into a USB-C port that supplies 5V at 2A while passing Gigabit Ethernet data. It targets installers who need to power and connect USB-C tablets, phones or thin clients from a single network cable without a local mains socket.

Passive Thermal Operation and Low Power Draw

The adapter has no fan and relies on its small 0.06 kg enclosure to dissipate the heat from the 10W PoE input. Silent operation is guaranteed because there are no moving parts and the conversion circuitry runs well within the 15.4W IEEE802.3af budget.

Sustained Load Behaviour

Under continuous 1000Mbps throughput and full 2A charging the unit maintains stable voltage without throttling, as the PoE source limits the total power to the standard 15.4W ceiling. Non-PoE Ethernet links still provide data but cannot supply charging current.

Highlights

  • Converts IEEE 802.3af PoE to USB-C 5V 2A power and gigabit data
  • Plug-and-play setup delivers instant 1000 Mbps wired Ethernet without configuration
  • Single adapter replaces separate power supply and network cable for phones and tablets
  • Works with Windows Android iOS devices for universal mobile connectivity
  • Lightweight 0.06 kg design fits in a pocket for travel and remote work

Specifications

BrandPROCET PoE System
ModelPT-PGC-AF
Weight0.06 kilograms

Questions about this item

How do I install the PT-PGC-AF adapter and what is the common mistake?

Connect the RJ45 cable from an IEEE802.3af PoE switch or injector to the adapter, then plug the USB-C end into the phone or tablet. The step people miss is using a non-PoE cable, which gives data but no charging.

What maintenance or replacement will the PT-PGC-AF need later?

No internal parts require scheduled replacement. Keep the RJ45 port and USB-C connector free of dust; if the cable latch breaks or the USB-C plug wears loose, replace the whole adapter.

What limit appears first during sustained use of the PT-PGC-AF?

The IEEE802.3af input caps power at 15.4W, so the USB-C output stays at 5V 2A. Continuous gigabit throughput at 1000Mbps is the next ceiling, but the power budget is reached first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.