We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PrimoChill PETG acrylic reamer deburring tool for 16mm tube

PrimoChill

PrimoChill PETG Acrylic Reamer Deburring Tool 16mm tube range diy cooling

SKU CH-TQVP-6D9H0

Cleans cut PETG and acrylic tubing ends inside and out with hardened steel blades

  • TypeCPU Block
  • Cleans tube ends for leak-free seals
  • Hardened steel blades cut PETG and acrylic
  • Compact size fits easily in hand
  • Covers 16 mm outer diameter tubing
  • Single tool deburrs inside and outside surfaces

Hand Reamer for PETG and Acrylic Tubing

This deburring tool is designed for DIY water-cooling builders who cut their own PETG or acrylic tubing. It removes burrs from both the inside and outside of each cut so that fittings seal cleanly. The compact handle fits comfortably in one hand and stores easily in a tool drawer. It is intended for hobbyists assembling custom loops rather than production-line use.

Hardened Steel Blades for 3/16 to 1-1/2 Inch Range

The tool uses hardened steel blades that clean the full circumference of the tube in a single twisting motion. Its working range covers tubing from 3/16 inch up to 1-1/2 inch outer diameter, matching common sizes used in PC cooling. The small footprint means it can be kept with other loop-assembly tools without taking up bench space. No power source or fixture is required.

Replaces Hand Files and Improvised Methods

Builders who have been using needle files, sandpaper or knife blades to deburr tubing will find this reamer faster and more consistent. It eliminates the uneven edges that can cause leaks or restrict flow in compression fittings. The upgrade is worthwhile whenever a loop uses multiple PETG or acrylic runs and repeatable, leak-free joints are a priority. It does not suit metal tubing or very large industrial diameters.

Highlights

  • Cleans tube ends for leak-free seals
  • Hardened steel blades cut PETG and acrylic
  • Compact size fits easily in hand
  • Covers 16 mm outer diameter tubing
  • Single tool deburrs inside and outside surfaces

Specifications

TypeCPU Block

Questions about this item

What tube size range does the PrimoChill PETG Acrylic Reamer Deburring Tool support?

The tool handles tubes from 3/16 inch up to 1-1/2 inch outer diameter, covering the common 16mm size used in custom loops.

What physical clearance is needed to use this reamer on a tube?

It is a compact hand tool that fits around the tube end; you only need enough space to insert the tube and rotate the tool by hand.

How do you operate the reamer, and what mistake should be avoided?

Insert the tube, turn the tool to deburr both inside and outside edges, and repeat until clean; do not force the blades or skip the inside pass.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.