We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver nickel 90 degree rotary elbow fitting with 15mm extension

PrimoChill

PrimoChill Male-Female G1/4 90° Rotary 15mm Extension Elbow Silver Nickel

SKU CH-TQNK-JHPNX

A G1/4 rotary 90-degree elbow with 15mm extension and 360-degree adjustment redirects tubing runs in tight spaces

  • TypeFittings

Option Silver Nickel

Struck-through versions exist but are not stocked here.

  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing runs away from tight component layouts
  • 15 mm extension adds clearance when nearby parts block a straight fitting
  • Nickel-plated brass resists corrosion while matching silver-themed loops
  • G1/4 threads fit standard water-cooling components without adapters

Loop redirection fitting

The PrimoChill G1/4 rotary elbow connects a male thread to a female thread at a 90 degree angle. It suits custom liquid-cooling builders who need to change tubing direction quickly around tight component layouts. The 15mm extension adds clearance when nearby parts block a straight run.

Thermals noise power

This passive brass fitting has no moving parts, fans or electrical draw. It adds no audible noise and contributes no measurable heat to the loop. The nickel finish resists corrosion without affecting coolant flow or temperature.

G1/4 thread compatibility

The fitting uses standard G1/4 threads with a 5mm thread depth and 37.7mm total height. It only works with components that share the same thread specification. Builders using different thread sizes or proprietary quick-connect systems cannot use this adapter.

Highlights

  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing runs away from tight component layouts
  • 15 mm extension adds clearance when nearby parts block a straight fitting
  • Nickel-plated brass resists corrosion while matching silver-themed loops
  • G1/4 threads fit standard water-cooling components without adapters

Specifications

TypeFittings

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the G1/4 90° rotary elbow and which step is often missed?

Thread the male G1/4 end 5 mm into the component port, then rotate the 360° rotary joint to aim the female outlet before tightening; the step people skip is aligning the 15 mm extension clearance before final torque.

What maintenance or replacement will this fitting need later?

Inspect the nickel-plated brass threads and O-ring seal during each loop drain; replace the fitting if the finish shows pitting or the rotary joint develops play beyond the 90° sweep.

What limit appears first under sustained use?

The 37.7 mm total height and fixed 90° bend angle restrict routing options in tight builds before the brass material or nickel finish reaches any thermal or structural limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.