We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White POM cylindrical reservoir with black knurled rings, 360mm acrylic tube, D5 pump head installed

PrimoChill

PrimoChill CTR Hard Mount High Flow D5 Reservoir White POM 360mm TX Matte Black

SKU CH-AVBJ-4W7V3

A 360 mm acrylic tube reservoir with compression-ring end caps and integrated D5 pump head, G ¼ ports and 57 mm inner diameter

  • Compression-ring end caps seal without cutting acrylic tube
  • 57 mm inner diameter supports high-flow D5 pump integration
  • 360 mm reservoir length fits standard case spacing
  • White POM end caps and pump head resist corrosion
  • Includes anti-vibration pads and knurled mount rings for secure installation

Reservoir for D5 pump integration

The PrimoChill CTR Hard Mount reservoir is built for custom-loop builders who want a secure, tool-free seal on acrylic tubing. Its compression-ring end caps create a watertight joint without cutting or tapping the tube ends, reducing the risk of cracks during assembly. The 360 mm white POM body matches TX Matte Black accents and accepts standard G 1/4 fittings. Pump is not included.

Flow path and sustained operation

The high-flow internal design minimises restriction so a Laing D5 or PrimoChill PWM D5 variant can maintain consistent coolant velocity during long gaming or rendering sessions. Low-profile port caps and the three-port mountable end cap keep the plumbing tidy while preserving unrestricted passages. Knurled mount rings and rubber anti-vibration pads hold the cylinder firmly without transmitting pump vibration to the chassis.

Thermal and acoustic profile

The 57 mm inner diameter and 63 mm outer diameter provide ample fluid volume to dampen temperature spikes, helping the loop reach equilibrium faster under continuous load. White POM construction resists staining and does not add measurable heat to the coolant. With the pump isolated by the supplied O-rings and pads, operational noise stays low even at higher D5 speed settings, keeping the system quiet in typical desktop use.

Highlights

  • Compression-ring end caps seal without cutting acrylic tube
  • 57 mm inner diameter supports high-flow D5 pump integration
  • 360 mm reservoir length fits standard case spacing
  • White POM end caps and pump head resist corrosion
  • Includes anti-vibration pads and knurled mount rings for secure installation

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or noise does the 360 mm long D5 pump head add when the loop runs all day?

The reservoir body itself adds no heat or noise; only the installed D5 pump generates both, and its output depends on the specific pump model you choose.

Which separate components must I already own so the 2.5 inch OD reservoir with G 1/4 ports becomes a working loop?

You need a Laing D5 variant or PrimoChill PWM D5 pump, G 1/4 fittings, tubing sized for 57 mm ID, coolant, and a power source for the pump.

Will the 445 mm overall length with pump installed clear my existing ATX motherboard and 360 mm radiator mounting points?

The assembled unit measures 445 mm end-to-end; verify your case clearance against that figure before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.