We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White POM reservoir tube 240mm with black knurled rings and D5 pump head installed

PrimoChill

PrimoChill CTR Hard Mount D5 Reservoir White POM 240mm TX Matte Black

SKU CH-BH44-3WRX8

Hard-mount D5 reservoir with compression-ring end caps, 240 mm tube, 57 mm inner diameter, 325 mm overall length

  • Compression-ring end caps seal without cutting tubing
  • 240 mm acrylic tube with 57 mm inner diameter for high flow
  • White POM end cap and D5 pump head pre-installed
  • Three knurled TX matte black mount rings included
  • G 1/4 threads accept standard water-cooling fittings

CTR Hard-Mount Reservoir for D5 Loops

The PrimoChill CTR reservoir uses compression-ring end caps to seal a 240 mm acrylic tube without cutting or tapping. It accepts Laing D5 or PrimoChill PWM D5 pumps and is aimed at custom-loop builders who want a clean, tool-free assembly.

Thermals Noise and Power

The reservoir itself adds no heat or noise; thermal and acoustic performance depends entirely on the chosen D5 pump and the rest of the loop. G 1/4 threads allow standard fittings so flow restriction stays low when paired with a compatible pump.

Bundled Parts and Their Effect

Included are three low-profile port caps, a three-port mountable end cap, a D5 pump head, three knurled TX Matte Black mount rings, rubber anti-vibration pads and all required O-rings. These components let you seal, mount and plumb the reservoir in multiple orientations without extra purchases.

Highlights

  • Compression-ring end caps seal without cutting tubing
  • 240 mm acrylic tube with 57 mm inner diameter for high flow
  • White POM end cap and D5 pump head pre-installed
  • Three knurled TX matte black mount rings included
  • G 1/4 threads accept standard water-cooling fittings

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 240 mm CTR tube without cracking it?

Slide the tube into the compression-ring end caps; the knurled mount rings clamp the tube evenly so no cutting or tapping is required.

Which seals will need replacement after long-term use?

The four CTR O-rings, the pump O-ring and the three low-profile port-cap O-rings are the wearable seals.

At what point does the 57 mm inner diameter restrict flow in a D5 loop?

The 57 mm bore matches standard D5 inlets, so restriction only appears if the pump runs above its rated head pressure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.