We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black POM cylindrical reservoir, 240 mm acrylic tube, matte black knurled end caps and pump head installed

PrimoChill

PrimoChill CTR Hard Mount D5 Reservoir Black POM 240mm TX Matte Black

SKU CH-6K2P-CYVST

A 240 mm hard-mount reservoir with compression-ring end caps for Leak-free D5 pump integration, G 1/4 ports and 57 mm inner diameter

  • Compression-ring end caps seal without cutting or tapping the tube
  • Hard-mount design secures Laing D5 pump variants directly to the reservoir
  • 240 mm clear acrylic tube with 57 mm inner diameter for high flow
  • Black POM end caps and TX Matte Black knurled rings resist corrosion
  • Includes three low-profile port caps, anti-vibration pads and all O-rings installed

Reservoir design and audience

The PrimoChill CTR Hard Mount reservoir uses compression-ring end caps to seal a 57 mm inner-diameter acrylic tube without cutting or tapping. The 2.5 inch outer diameter and G 1/4 threaded ports suit custom-loop builders who want a secure, leak-free reservoir that accepts a Laing D5 or PrimoChill PWM D5 pump. It is not for buyers who need an integrated pump or a reservoir with a different mounting footprint.

Bundled accessories and their effect

Three low-profile port caps, a three-port mountable end cap, a D5 pump head and three knurled mount rings come pre-installed in black POM with a TX matte black finish. Two rubber anti-vibration pads, four CTR O-rings and a pump O-ring are also included. These parts eliminate separate fitting purchases and provide vibration damping, but they do not add lighting, temperature sensors or additional port configurations beyond the three G 1/4 ports.

Capacity and headroom

The reservoir measures 325 mm overall length with a pump installed and offers a 240 mm tube section, giving a 2.25 inch internal bore for high-flow coolant volume. This size handles typical single-loop builds with one D5 pump and multiple radiators, but it will not fit cases limited to shorter reservoir lengths or builders who require dual-pump redundancy in a single body.

Highlights

  • Compression-ring end caps seal without cutting or tapping the tube
  • Hard-mount design secures Laing D5 pump variants directly to the reservoir
  • 240 mm clear acrylic tube with 57 mm inner diameter for high flow
  • Black POM end caps and TX Matte Black knurled rings resist corrosion
  • Includes three low-profile port caps, anti-vibration pads and all O-rings installed

Specifications

No published specifications for this item yet.

Questions about this item

Will the G 1/4 fitting threads need re-taping or replacement after repeated disassembly?

The G 1/4 threads are metal and designed for repeated use; the included low-profile port caps and O-rings maintain the seal without thread tape.

What limits continuous flow in a 240 mm long reservoir with 57 mm inner diameter?

The 57 mm inner diameter and 325 mm overall length set the hydraulic cross-section; flow is limited by the installed D5 pump head, not the reservoir tube.

How much heat does the Black POM pump head add during all-day operation?

The POM pump head and acrylic tube are passive; all heat comes from the D5 pump motor, which the reservoir does not amplify.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.