We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PETG tubing kit with bending tools and fittings

PrimoChill

PrimoChill Complete 5/8 Inch PETG Kit 30in 45/90/180 diy cooling

SKU CH-41WY-T5X3H

Complete PETG hard-tube kit with 30 in tubing, 45/90/180 bending tools, cutter and finishing bit for custom water-cooling builds

  • TypeCPU Block
  • All-in-one kit tested for zero compatibility issues
  • Includes 45/90/180 degree bending set for precise angles
  • PETG tubing offers superior strength over acrylic
  • Thicker 1/16 inch wall enables safer operation
  • Environmentally responsible, non-toxic PETG material

PrimoChill PETG 5/8 Inch Hard-Tube Kit

This all-in-one kit supplies 5/8 inch outer-diameter PETG tubing plus the cutter, reamer, bending insert, lubricant and multi-angle bending tool needed to measure, cut, bend and install a custom water-cooling loop. It is aimed at PC builders who want a single package of matched parts instead of sourcing each component separately.

Six 30 Inch Lengths with Thicker Wall Construction

The six included tubes each measure 30 inches and feature a 1/16 inch wall that is thicker than standard acrylic alternatives, giving extra burst resistance during sustained pressure and temperature cycles inside a sealed loop. PETG material handles repeated heat-gun bending without clouding or micro-cracking, so the finished bends stay clear and leak-free over long-term operation.

Upgrades Acrylic Tubing and Mismatched Tool Sets

The kit replaces individual acrylic tubes and improvised bending tools that often produce uneven radii or stress marks. The jump is worth it when a builder wants guaranteed fitting compatibility with 5/8 inch OD rigid fittings and a repeatable workflow for 45, 90 and 180 degree bends without buying separate jigs or risking material incompatibility.

Highlights

  • All-in-one kit tested for zero compatibility issues
  • Includes 45/90/180 degree bending set for precise angles
  • PETG tubing offers superior strength over acrylic
  • Thicker 1/16 inch wall enables safer operation
  • Environmentally responsible, non-toxic PETG material

Specifications

TypeCPU Block

Questions about this item

Does the PETG tubing produce any noise, heat or power draw when the loop runs continuously?

The tubing itself is passive PETG with a 1/16in. wall and 5/8in. OD; it adds no noise, heat or electrical load to the system.

Which 5/8in. OD rigid fittings must I already own to complete this kit?

You need compatible 5/8in. OD rigid fittings for the 1/2in. ID tubing; the kit supplies tube, bending tools, RFB drill bit, insert and lube only.

Can I mix the 30in. PETG lengths with older acrylic tubing in the same loop?

Yes, the 5/8in. OD PETG matches standard rigid-fitting dimensions, so it connects directly to existing acrylic runs using the same 5/8in. OD fittings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.