We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PrimoChill PETG tubing kit with bending tools and accessories

PrimoChill

PrimoChill Basic 14mm PETG DIY Cooling Kit

SKU CH-HDXN-TZ546

Complete 14 mm PETG hard-tube kit with bending tools, reamer, insert and lube for custom CPU loops

  • TypeCPU Block
  • All-in-one kit tested for zero-issue compatibility
  • Superior strength over acrylic with 2mm wall thickness
  • Environmentally responsible, safe and non-toxic PETG material
  • Complete tooling: reamer, bending insert, tube lube, 45/90/180 degree bending set
  • Six 30-inch tubes, 10mm inner and 14mm outer diameter for 14mm fittings

Complete 14 mm PETG DIY Kit

This all-in-one package supplies 14 mm outer-diameter PETG tubing, a bending set, tube lube, a reamer and a bending insert so builders can measure, cut, bend and install a custom loop without sourcing parts separately. The kit is designed and tested to work together with zero compatibility issues.

Fits standard 14 mm rigid fittings

The included 30 inch PETG lengths have a 10 mm inner diameter and 2 mm wall thickness, matching common 14 mm OD compression fittings. The bending set covers 45, 90 and 180 degree angles, while the insert and lube let a heat gun form precise curves without collapsing the tube.

Thicker wall resists deformation under heat

PETG material offers superior strength to acrylic and remains non-toxic during extended bending sessions. The 2 mm wall and provided deburring tool produce clean chamfers that maintain seal integrity during sustained system operation.

Highlights

  • All-in-one kit tested for zero-issue compatibility
  • Superior strength over acrylic with 2mm wall thickness
  • Environmentally responsible, safe and non-toxic PETG material
  • Complete tooling: reamer, bending insert, tube lube, 45/90/180 degree bending set
  • Six 30-inch tubes, 10mm inner and 14mm outer diameter for 14mm fittings

Specifications

TypeCPU Block

Questions about this item

How far will the 30 inch PETG tubing run before I need another piece?

Each tube is 30 inches long, giving you up to 30 inches of straight run per piece before a join is required

How hot does the bending set get when I use it all day with a heat gun?

The 45/90/180 degree bending set is made to withstand repeated heat-gun use; it stays cool enough to handle safely between bends

Which fittings must I already own to connect the 14 mm tubing?

You need 14 mm OD rigid fittings, sold separately, to join the PETG tubes to your blocks and radiators

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.