We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Solid silicone cord for bending 10mm ID rigid tubing

PrimoChill

PrimoChill 9.5mm OD Rigid Tubing Bending Cord diy cooling

SKU CH-9AQ7-GSVEH

Solid silicone cord prevents collapse when heating and bending 10 mm ID rigid tubing

  • TypeCPU Block
  • Tube Dim.10mm OD (For 10mm ID Tube)
  • Prevents tube collapse during complex bends
  • Solid silicone cord resists deformation under heat
  • Tight fit reduces kinks and air pockets
  • Designed for 10mm ID acrylic or PETG tubing
  • 3-foot length covers multiple bending jobs

Bending Cord for 10mm ID Rigid Tubing

The PrimoChill 9.5mm OD solid silicone cord is designed for DIY liquid-cooling builders who work with 10mm inner-diameter acrylic or PETG tubing. It sits inside the tube while heat is applied, preventing the walls from collapsing or forming cavities during complex bends. The tight fit is intentional and requires stretching plus lubrication before insertion.

Internal Support During Heat Bending

The cord acts as a temporary mandrel that frees the builder from kinks, flat spots and air pockets when shaping rigid runs. It demands patience and practice; the solid construction makes removal harder than hollow alternatives and it cannot be stretched as far. A 3-foot length is supplied for cutting to the required bend sections.

Upgrade from Hollow Inserts or No Insert

Builders moving up from tubed inserts or improvised tools gain tighter bend radii with less surface distortion on intricate loops. The trade-off is a more difficult extraction and limited stretch, so the jump is worth it only when the routing demands bends that would otherwise collapse the tube.

Highlights

  • Prevents tube collapse during complex bends
  • Solid silicone cord resists deformation under heat
  • Tight fit reduces kinks and air pockets
  • Designed for 10mm ID acrylic or PETG tubing
  • 3-foot length covers multiple bending jobs

Specifications

TypeCPU Block
Tube Dim.10mm OD (For 10mm ID Tube)

Questions about this item

How does the 10 mm inner diameter affect bending performance?

The cord is sized for 10 mm ID acrylic or PETG tube, giving a tight fit that prevents collapse and air pockets during heating.

Does the solid silicone cord generate heat or noise during extended bending sessions?

The cord is a passive silicone insert; it produces no heat or noise while the tubing is heated and bent.

What tubing must I already have to use this 9.5 mm OD bending cord?

You need 10 mm inner diameter acrylic or PETG rigid tubing; the cord is not compatible with other sizes or materials.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.